Philips-FWM-589-Service-Manual(1) 电路图 维修手册.pdf

《Philips-FWM-589-Service-Manual(1) 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Philips-FWM-589-Service-Manual(1) 电路图 维修手册.pdf（90页珍藏版）》请在收音机爱好者资料库上搜索。

1、GB CLASS 1 LASER PRODUCT Service Manual Service ServiceService ServiceService FW-M589/21/22/30 TABLE OF CONTENTS Page Location of PCBs fr Reparaturen sind Original-Ersatzteile zu verwenden. Sicherheitsbauteile sind durch das Symbol ! markiert. I Le norme di sicurezza esigono che lapparecchio venga r

2、imesso nelle condizioni originali e che siano utilizzati i pezzi di ricambio identici a quelli specificati. Componenty di sicurezza sono marcati con ! GB After servicing and before returning set to customer perform a leakage current measurement test from all exposed metal parts to earth ground to as

3、sure no shock hazard exist. The leakage current must not exceed 0.5mA. Connections VOLTAGE NOT FOR ALL VERSIONS SELECTOR 110V- 127V 220V- 240V Game console OUT OUT Warning! Use only the supplied speakers. The combination of the main unit and speakers provides the best sound. Using other speakers can

4、 damage the unit and sound quality will be negatively affected. Never make or change connections with the power switched on. Connect the AC power cord to the power outlet only after you have finished hooking up everything. To avoid overheating of the system, a safety circuit has been built in. There

5、fore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions). Step 1: Connecting FM/MW antennas Place the MW loop antenna on a shelf or attach it to a stand or wall. Extend the FM ant

6、enna and fix its ends to the wall. Adjust the position of the antennas for optimal reception. Position the antennas as far as possible from a TV, VCR or other radiation source to prevent unwanted noise. For better FM stereo reception, connect external FM antenna. Refer to page 10. Step 2: Connecting

7、 the speakers Connect the speaker wires to the SPEAKERS terminals, right speaker to “R”and left speaker to “L”, coloured (marked) wire to “+”and black (unmarked) wire to “-”. Fully insert the stripped portion of the speaker wire into the terminal as shown on page 10. Notes: Ensure that the speaker c

8、ables are correctly connected. Improper connections may damage the system due to short-circuit. Do not connect more than one speaker to any one pair of +/- speaker terminals. Step 3: Connecting to PC via USB cable Use the supplied USB cable to connect the system to your personal computers USB port.

9、After installing the USB PC LINK application software onto your PC, you are able to play your music collection via the system (refer to “USB PC Link”). Step 4: Connecting to game console IMPORTANT! Gameport inputs are solely for game console only. a.Use the game consoles video cable (not supplied) t

10、o connect its video output to the GAMEPORT-VIDEO terminal. b.Use the game consoles audio cables (not supplied) to connect its audio outputs to the GAMEPORT-AUDIO L. / AUDIO R. terminals. c.Use the video cable (yellow) to connect the VIDEO OUT terminal to the video input on the TV for viewing. Notes:

11、 On the TV, the Video Input jack is usually yellow and might be labeled A/V In, CVBS, Composite or Baseband. To avoid magnetic interference, do not position the front speakers too close to your TV. Step 5: Connecting the AC power cord “AUTO INSTALL - PRESS PLAY”may appear on the display panel when t

12、he AC power cord is plugged into the power outlet for the first time. Press on the main unit to store all available radio stations (page 3 - P3) or press to exit (refer to “Tuner Operations”). Connections 1-7 Step 6: Inserting batteries into the remote control 1 3 2 1Open the battery compartment cov

13、er. 2Insert two batteries type R06 or AA, following the indications (+-) inside the compartment. 3Close the cover. Using the remote control to operate the system 1Aim the remote control directly at the remote sensor (iR) on the main unit. 2Select the source you wish to control by pressing one of the

14、 source select keys on the remote control (for example CD, TUNER). 3Then select the desired function (for example , , ). CAUTION! Remove batteries if they are exhausted or will not be used for a long time. Do not use old and new or different types of batteries in combination. Batteries contain chemi

15、cal substances, so they should be disposed of properly. ConnectionsGameport Operations About Gameport Gameport allows you to connect your game console to this mini system which enables you to enjoy a total game immersion experience through powerful sound output. Preparation before use Game console f

16、ront panel rear panel SPEEDPUNCHBLAST MODEMODE MIX-IT GAME SOUN D GA ME SO UND G A M E V O L U M E GAMEGAMEAUXAUX A U D I O L . V I D E O A U D I O R . 2 3 1 5 6 7 1Connect your game consoles video and audio output to the GAMEPORT video and audio inputs respectively (refer to “Connections - Connecti

17、ng to game console). 2Connect your TVs video input to the VIDEO OUT (CVBS) on the rear panel. 3Connect all the AC power cord to the power outlet. Starting operation 4Turn on the TV and set to the correct video- in channel. The TVs video input channel may be called AUX(iliary) IN, AUDIO/VIDEO (A/V) I

18、N, EXT 1, etc. These channels are often near channel 00 on your TV. Or, your TV remote control may have a button or switch that chooses different video modes. See your TV manual for details. 5Press AUXGAME until “GAMEPORT” is display. 6Press MODE (or GAME SOUND on remote) to select the type of sound

19、 setting that best suit the game : SPEED, PUNCH, BLAST or OFF. 7If you like to mix your game sound to your favourite music, press MIX-IT to select the desired music source : CD,TUNER,USB PC LINK,AUX or OFF. CD “MIX-CD TUNER “MIX-TU USB PC LINK “MIX-USB AUX “MIX-AUX OFF “MIX-OFF Note: To change the d

20、isc tray, you have to press CD, then press CD 15 to select the desired disc tray. 8If necessary, start playback of your chosen mixer source. 9Start playing your favourite game. To adjust the game consoles volume level Adjust GAME VOLUME. Notes: You can only activate GAME VOLUME and MIX- IT while in

21、the game source mode. If your game console is switched on, the video image will always appear on the TV even though you are not in the gameport mode. 1-8 Functional Overview Main unit and remote control 1ECO POWER indicator Lights up when the system is in Eco Power standby mode. 2STANDBY ON B Switch

22、es to Eco Power standby mode or turns on the system. *Switches to standby mode. 3Display screen 4CLOCKTIMER (CLK/TIMER) *Enters clock or timer setting mode. 5RDSNEWS In tuner mode, selects RDS information. In other modes, turns on/off news. 6CD / TUNER / USB PC LINK / AUXGAME Selects the relevant ac

23、tive mode. CD: toggles between DISC 15. TUNER: toggles between FM and MW band. AUXGAME: toggles between AUX and GAMEPORT mode. 7PREVPRESET 4 (TITLE ) () NEXTPRESET 3 (TITLE +) () CD: selects a track or selects a title from MP3 disc. TUNER: selects a preset radio station. CLOCK: sets the minutes. USB

24、 PC LINK: selects a track from the playlist. 8STOPDEMO STOP 9 Exits an operation. CD: stops playback or clears a programme. TUNER: *erases a preset radio station. USB PC LINK: stops playback. (only on the main unit) *Turns on/off the demonstration mode. 9SEARCHTUNING (ALBUM/PLAYLIST 43) ( ) CD: *sea

25、rches backward/forward or selects an album from MP3 disc. TUNER: tunes the radio frequency up/down. CLOCK: sets the hours. USB PC LINK: Select your desired playlist. * = Press and hold the button for more than two seconds. 4 ! ( & # 7 6 * 8 0 9 ST ANDBY ON MP3 ) ( * & % 1 2 3 4 5 6 ! # $ 7 0 9 8 25

26、27 24 32 0PLAYPAUSE CD: starts/pauses playback. USB PC LINK: starts/pauses playback. (only on the main unit) TUNER: *enters Plug & Play mode and/or starts preset radio station installation. !MAX SOUND (MAX ON/OFF) Turns on/off the optimal mix of various sound features. MIX IT (GAME MIX IT) Mixes the

27、 game sound with your favourite music from one of these music sources (CD, TUNER, USB PC LINK or AUX). #MODE (GAME SOUND) Selects different type of equaliser setting for Gameport (SPEED, PUNCH or BLAST). $Connect the USB cable between the system and PCs USB port. %GAME VOLUME Adjusts the games outpu

28、t volume level. VIDEO Use a video cable to connect to your game consoles video output. AUDIO L. / AUDIO R. Use an audio cable to connect to your game consoles left/right audio output. &DBB Selects different type of bass boost level settings (DBB 1, DBB 2, DBB 3 or DBB OFF). DSC/PRESET Selects differ

29、ent type of preset sound equaliser settings (OPTIMAL, JAZZ, ROCK or POP). VAC/REVERB Selects different type of ambience-based equaliser settings (HALL, CINEMA, CONCERT, CYBER or ARCADE). PRESET and REVERB environment sound modes are only available when the optional software, Philips Sound Agent 2 is

30、 activated during USB PC Link application. Functional Overview * = Press and hold the button for more than two *MASTER VOLUME (VOL + ) Adjusts the volume level. (PROG (PROGRAM) CD: starts or confirms tracks programming. TUNER: starts *automatic/manual preset programming. CLOCK: selects 12- or 24-hou

31、r clock display. )n Plug in the headphones jack. The speakers output will be cancelled. VU meters Indicates signal strength of left/right channel. iR SENSOR Point the remote control towards this sensor. Disc trays (15) OPENCLOSE 0 (DISC 15) Opens/closes the respective disc tray. Control buttons avai

32、lable on the remote control only CD 15 Selects a disc tray to playback. REPEAT Repeats a track/disc/all programmed tracks. DIM Turns on/off the dim mode. SLEEP Sets the sleep timer function. MUTE Mutes or restores the volume. TIMER ON/OFF Turns on/off the timer function. SHUFFLE Turns on/off the ran

33、dom play mode. DISPLAY Displays the album and title name for MP3 disc. B Switches to Eco Power standby mode. *Switches to standby mode.seconds 1-9 IMPORTANT! Make sure the mute setting on your PC control panel is deactivated to ensure you get the sound from your audio system! Quick setup guide PC sy

34、stem requirement Windows 98SE/ME/2000/XP Intel Pentium MMX200 or higher CD-ROM drive USB port Free hard disk space: 80 MB for the software Software installation 2 43 2 1 6 5 1Turn on your PC and insert the installer disc into your PCs CD-ROM drive. 2The installation guide will appear automatically.

35、If it does not, go to the CD-ROM drive in Windows Explorer and double click the Setup.exe. 3Select your desired language from the list. 4Select install Software. 5Connect the USB cable to the PC and Audio System and press the USB PC Link button on the Audio set or the remote control. 6Follow the ins

36、tructions as prompted on the screen to correctly install the USB PC Link Driver, Philips Sound Agent 2 and MusicMatch Jukebox software. Notes: Minimum OS requirement for Philips Sound Agent 2: Windows 2000 or XP. During installation, your previous MusicMatch Jukebox software on your PC will be repla

37、ced. Declarations Windows and Pentium are trademarks of Microsoft Corporation and Intel Corporation. All other trademarks belong to their respective owners. USB PC Link sample track, music by Chemistry () USB PC Link Using MusicMatch software To create a music library Add music files to My Music Lib

38、rary Add files to My Library by dragging and dropping audio tracks from anywhere in Windows, into the My Library window. You can also click Add Files in the Music Center to add tracks. 1Click the Add Files button on the Music Library window. 2Browse your computer to the folder where audio files are

39、stored. Check the box Also Add Tracks from Subfolders to add all tracks in the current folder, and all subfolders. 3Click the Select All button to select all the files in the current, and all subfolders. 4Click Add. Files will be added to My Library. To create a “Playlist” 1Drag and drop files, or f

40、olders with music files, from anywhere on your computer or My Library into the Playlist window. Your files will begin to play. Or, you may click the Open button on the Playlist window to browse for and add music to the Playlist. 2Click the Save button on the Playlist, or go to the menu OptionsPlayli

41、stSave Playlist. 3You will be prompted to name the Playlist. In the Name field type the name youd like to give this Playlist. 4Click the Save button. Now you can play all the saved playlists with the audio system by pressing S or T buttons. Details operation, please refer to Connecting to USB PC Lin

42、k. Note: It is not possible to create a playlist from the systems 5 CD changer. If you encounter any problem using USB PC Link, please refer to the FAQ (Frequently Asked Questions) stored in your USB PC Link installer disc or visit “” for the latest update on FAQ. Connecting to USB PC Link USB PC Li

43、nk allows you to playback your music collection from the PC via the powerful amplifier and speakers of this system. IMPORTANT! Make sure the MUSICMATCH software has been installed. Refer to the CD-ROM sleeve for USB PC Link installation. 1 2 3 4 5 1Turn on your computer and launch the “MUSICMATCH JU

44、KEBOX”. The volume level of PC should not be put into mute. 2Press USB PC LINK. If the audio streaming is detected, “CONNECTING” is displayed and the USB indicator will be flashing. If “NO CONNECTION”is displayed, check the connection between your PC and micro system. USB PC Link 1-10 Notes: When th

45、e USB PC Link feature is activated, Philips Sound Agent 2 will automatically be launched (if it has been successfully installed under OS Windows 2000/XP). The default setting for PRESET/REVERB is MP3/ Study Room respectively. You may select from the list of different sound modes to suit your music a

46、nd environment preference. Alternatively, you may select PRESET (Neutral mode) and REVERB (No Environment mode) for the minimum sound effect. 3Press or to select your favorite playlist, and then press or until the desired track in the playlist is highlighted. 4Press to start playback. The track info

47、rmation will appear on the display. The display only supports English characters. During playback, Press SHUFFLE to play all available tracks in the playlist in random order. Press REPEAT to repeat playback of all the tracks in the playlist. 5To exit, select another active mode or press . Philips So

48、und Agent 2 Philips Sound Agent 2 is a BONUS software provided with Philips Audio system to enhance the quality of MP3 Music playback via USB PC Link. 1Philips Sound Agent 2 will be automatically launched if USB PC Link is selected. 2Press DSC/PRESET or VAC/REVERB to select different Preset or Rever

49、b sound effect. 3For more details about using Philips Sound Agent 2 features on your PC, please refer to the User Manual in the supplied CD-ROM or the Help menu. Notes: Philips Sound Agent 2 minimum OS requirement: Windows 2000 or XP. Please refer to the CD-ROM sleeve for detailed installation procedures, OR Software installation in this manual. Enabling digital CD audio output Before playing the CD through your PCs CD-ROM drive, it is necessary to configure your PCs hardware as follows: For Windows ME/2000/XP 1Enter