Marantz-UD8004-sacd-mz10032 电路图 维修手册.pdf

《Marantz-UD8004-sacd-mz10032 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-UD8004-sacd-mz10032 电路图 维修手册.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ10-032 Date: August 19, 2010 _ Model: UD8004 Subject: Correction of the firmware. Countermeasure is applicable only upon claim from the customer. Symptom: 1) When BD software Ole Bull Violin Concertos was reproduced, the mShuttle functio

2、n might not work. 2) When BD software Clash of the Titans was reproduced, a sound might be outputted. 3) DVD disc AVATAR made in Germany might not be reproduced. After inserting it only shows PLAY in Display. Solution: We corrected the firmware so that no malfunction occurs. METHOD OF UPDATE via DPM

3、S (D&M Product Management Server) At the time this bulletin was produced, the firmware update was not uploaded onto the web server for DPMS, we will update the firmware via DPMS once two months. METHOD OF UPDATE by CD-R The following program files for updating the subject models are available for do

4、wnload. Therefore, please record each program file on a blank CD-R separately, and update the unit upon claim. * Program Files to be supplied _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employe

5、es. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No

6、responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Serv

7、ice Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information i

8、t contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Note: Upon recording the Disc: a) When recording the supplied file on the blank CD-R, the session shall be CLOSE. b) When re

9、cording the supplied file on the disc, please use the lowest recording speed that is available on your PC. If the file is recorded at a higher speed, the rewriting operation may fail due to improperly recorded data on the disc. Rewriting procedures of the FE/BE ROM (1) Download the DcmUpdate.fw and

10、DcmAuthentication firmware in SDI. (2) Please insert the DcmUpdate.fw and DcmAuthentication firmware into the Root directory. Root |_DcmUpdate.fw |_DcmAuthentication (3) Please burn the CD-R. (4) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc Tray. (5) Put the re

11、corded CD-R on the Disc Tray and press the buttons on the remote control in the order of 7, 9, 2 and RETURN. (6) The Disc Tray will close automatically. (7) The FL Display indicates LOADING, then information about updating repetition. Time necessary for update: approximately 25 min. (8) The new firm

12、ware is installed completely. (9) The Disc Tray opens automatically. (10) Take out the CD-R from the Disc Tray. Rewriting procedures of the SYSTEM ROM. (1) Download the 8004_SYS.ROM firmware in SDI. (2) Please make DM_FM_UP folder on PC. (3) Please insert the 8004_SYS.ROM firmware into DM_FM_UP fold

13、er. Root - DM_FM_UP |_8004_SYS.ROM (4) Please burn the CD-R. (5) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc Tray. (6) Put the recorded CD-R on the Disc Tray and press the buttons on the remote control in the order of 7, 9, 2 and ENTER. (7) The Disc Tray will

14、close automatically. RadioFans.CN 收音机爱 好者资料库 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected f

15、rom disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misu

16、se of the information contained in this document. (8) The FL Display will indicate information about updating repetition. Time necessary for update: approximately 5 min. (9) The unit turns off and turns on, and then NO DISC is indicated. (10) The new firmware is installed completely. (11) Press the

17、OPEN/CLOSE button and open the Disc Tray. (12) Take out the CD-R from the Disc Tray. Rewriting procedures of the DM860ROM. (1) Download the 8004_860.ROM firmware in SDI. (2) Please make DM_FM_UP folder on PC. (3) Please insert the 8004_860.ROM firmware into DM_FM_UP folder Root - DM_FM_UP |_8004_860

18、.ROM (4) Please burn the CD-R. (5) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc Tray. (6) Put the recorded CD-R on the Disc Tray and press the buttons on the remote control in the order of 7, 9, 2 and ENTER. (7) The Disc Tray will close automatically. (8) The F

19、L Display will indicate information about updating repetition. Time necessary for update: approximately 15 min. (9) The new firmware is installed completely. (10) The Disc Tray opens automatically. (11) Take out the CD-R from the Disc Tray. Rewriting procedures of the DSP ROM. (1) Download the 8004_

20、AD.ROM firmware in SDI. (2) Please make DM_FM_UP folder on PC. (3) Please insert the 8004_AD.ROM firmware into DM_FM_UP folder. Root - DM_FM_UP |_8004_AD.ROM (4) Please burn the CD-R. (5) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc Tray. (6) Put the recorded C

21、D-R on the Disc Tray and press the buttons on the remote control in the order of 7, 9, 2 and ENTER. (7) The Disc Tray will close automatically. (8) The FL Display will indicate information about updating repetition. Time necessary for update: approximately 3 min. (9) The new firmware is installed co

22、mpletely. (10) The Disc Tray opens automatically. (11) Take out the CD-R from the Disc Tray. RadioFans.CN 收音机爱 好者资料库 Confirmation of the version: (1) Press the OPEN/CLOSE button and open the Disc Tray. (2) Remove the Disc from the Tray. (3) Please confirm! NO DISC on the FL Display. (4) While pushin

23、g the PLAY and OPEN/CLOSE button, turn on the power of unit. (5) Plug in AC CORD. (6) The indication of PLAY and PAUSE will be displayed on FL Display. (7) Please confirm! NO DISC on the FL Display, and wait 10 seconds. (8) Press the buttons on the remote control in the order of 3, 2, 6 and 5. (9) T

24、he version of the firmware will be indicated on the FL Display. (10) The firmware list will also be shown on connected TV (GUI). (11) Push the UP button of cursor button, version of the each firmware will be indicated on the FL Display. The version of new firmware Serial Number Range: Please apply t

25、he above modification to the production models in the following serial numbers. (Full Digits) *000001 *000480 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain in

26、formation that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document.