Onkyo-CDC3_4-cd-sm 电路图 维修手册.pdf
《Onkyo-CDC3_4-cd-sm 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Onkyo-CDC3_4-cd-sm 电路图 维修手册.pdf(64页珍藏版)》请在收音机爱好者资料库上搜索。
1、CDC-3.4 SERVICE MANUALSERVICE MANUAL COMPACT DISC CHANGER Black model MODEL CDC-3.4 120V AC, 60HzBMDD Ref. No. 3783 Oct, 2003 RC-553C SAFETY-RELATED COMPONENT WARNING! COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLA
2、CE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. RadioFans.CN 收音机爱 好者资料库 CDC-3.4 SPE
3、CIFICATION CDC-3.4 (Compact Disc Changer) Signal readout system.Optical non-contact Frequency response.5 Hz-20 kHz SN ratio.98 dB Audio Dynamic range.96 dB THD (Total harmonic distortion).0.005% (at 1 kHz) Audio output (Digital/Optical).-22.5 dBm Audio output/Impedance (Digital/Coaxial).0.5 V (p-p)
4、/ 75 ohm Audio output/Impedance (Analog).2.0 V (rms) / 470 ohm Power supply rating.AC 120 V 60 Hz Power consumption.10 W Standby power consumption.4 W Dimensions (WxHxD).17-1/8 x 5-3/16 x 17-3/16(435 x 131 x 436 mm) Weight.15.0 lbs. (6.8 kg) Operating conditions Temperature/Humidity.41-95 F (5 -35 C
5、) / 25-80% Disc compatibilityCD, CD-R, CD-RW RC-553C (Remote Controller) Transmitter.Infrared Signal range.Approx. 16 ft., 5 meters Power supply.Two (AA/R6) batteries (1.5 V x 2) Specifications and features are subject to change without notice. . RadioFans.CN 收音机爱 好者资料库 CDC-3.4 SERVICE PROCEDURES PR
6、OTECTION OF EYES FROM LASER BEAM DURING SERVICING This set employs a laser. Therefore, be sure to follow carefully the instructions below when servicing. WARNING! SERVICE WARNING : DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SUR
7、E TO OBSERVE FROM A DISTANCE OF MORE THAN 30cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICKUP BLOCK. Laser Diode Properties Material: GaAS/GaAlAs Wavelength: 780nm Laser output: max. 0.5mW* Emission Duration: continuous *This output is the value measured at a distance about 1.8mm from
8、the objective lens surface on the Optical Pickup Block. LASER WARNING LABEL The labels shown below are affixed. DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. CAUTION: HAZARDOUS LASER AND ELECTROMAGNETIC RADIATION WHEN OPEN AND INTERLOCK
9、DEFEATED. ATTENTION: RAYONNEMENT LASER ET ELECTROMAGNETIQUE DANGEREUX SI OUVERT AVEC LECLENCHEMENT DE SECURITE ANNULE. Safety check out After correcting the original service problem perform the following safety check before releasing the set to the customer. Connect the insulating-resistance tester
10、between the plug of power supply cord and terminal GND on the back panel. Specifications: More than 10 M ohm at 500V. (Only U.S.A. model) Warning label Initializing the unit Press STOP key and STANDBY key at same time. Displayed INITIALIZE on the FL display. RadioFans.CN 收音机爱 好者资料库 CDC-3.4 PANEL VIE
11、W-1 Standby/On button This button is used to set the CDC-3.4 to On or Standby. Standby indicator This indicator lights up when the CDC-3.4 is in Standby mode. Repeat button This button is used with the Repeat function. Random button This button is used with the Random function. Dimmer button This bu
12、tton is used to adjust the display brightness. Display button This button is used to display elapsed, remaining, and total time information about the current disc or track and various information about MP3 tracks. Remote control sensor This sensor receives control signals from the remote controller
13、. Open/Close button This button is used to open and close the disc tray. Disc Select buttons These buttons are used to select discs. Playback starts automatically when a disc is selected with one of these buttons. Play/pause button This button is used to start and pause playback. Stop button This bu
14、tton is used to stop playback. / & Folder / buttons These buttons are used to select the previous and next tracks and to navigate folders on MP3 discs. / & Folder / buttons These buttons are used for fast reverse and fast forward and to navigate folders on MP3 discs. Disc Skip button This button is
15、used to turn the disc tray when loading or removing discs and to select discs for play- back. Disc tray light This light illuminates the disc tray. It comes on when the CDC-3.4 is turned on and gets brighter when the disc tray is open. Display Disc tray FRONT PANEL 123456789 101112131415 1 2 3 4 5 6
16、 7 8 9 10 11 12 13 14 15 RANDOM indicator MEMORY indicator REPEAT indicator DISC indicator The number of the current disc appears here. FLDR (FOLDER) indicator While stopped, the total number of folders on the current MP3 disc are displayed. During playback, the number of the current folder is displ
17、ayed. NEXT indicator This indicator appears when using the Next Selection function. TRACK indicator While stopped, the total number of tracks on the current disc are displayed. During playback, the number of the current track is displayed. NAME indicator This indicator appears when the current disc
18、is an MP3 disc and a name (disc, folder, track) is being displayed. TOTAL indicator This indicator appears when the total remain time is displayed. REMAIN indicator Play / Pause indicator MP3 indicator Disc indicators 1-6 TRACKNEXTTOTALDISC MP3 3 6 2 5 1 4 FLDR REPEAT MEMORY RANDOM REMAINNAME 123456
19、78910111213 1 2 3 4 5 6 7 8 9 10 11 12 13 FL DISPLAY ANALOG AUDIO OUTPUT These RCA/phono connectors can be connected to the analog audio inputs on a hi- amp or AV receiver. COAXIAL & OPTICAL DIGITAL AUDIO OUTPUT These connectors can be used to connect a CD-R, MiniDisc, DAT recorder, digital amp, or
20、other equipment with digital inputs. REMOTE CONTROL These (Remote Interactive) connectors can be connected to the connectors on your other Integra/Onkyo AV components for interactive control. To use you must also make analog audio con- nections (RCA/phono) between the CDC-3.4 and your other Integra/
21、Onkyo equipment. AC INLET The supplied power cord is connected here. The other end of the power cord should be connected to a suitable wall outlet. RS 232 This RS-232 port can be connected to an external controller. IR IN/OUT The IR IN connector can be used to connect a com- mercially available IR r
22、eceiver, which can be used to pickup signals from the remote controller when the CDC-3.4 is located in another room, installed in a rack, or is out of range of the remote controller. The IR OUT connector can be used to connect a commercially available IR emitter, which can be used to pass remote con
23、troller signals received by the IR IN along to other AV components. IR OUT IN MODEL NO. CDC- 3.4 2-1, NISSHIN-CHO, NEYAGAWA-SHI, OSAKA, JAPAN MADE IN CHINA COMPACT DISC CHANGER Integra Division of ONKYO CORPORATION RATING: AC 120 V 60 Hz 10 W RS 232 AC INLET 123 456 1 2 3 4 5 6 REAR PANEL CDC-3.4 PA
24、NEL VIEW-2 On button This button is used to turn on the CDC-3.4. Standby button This button is used to set the CDC-3.4 to Standby. Number buttons These buttons are used to enter track and MP3 folder numbers. Search (10) button This button is used to enter track numbers above 10 and to select MP3 fol
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Onkyo-CDC3_4-cd-sm 电路图 维修手册 Onkyo CDC3_4 cd sm 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


