Marantz-SR8002-avr-mz09042 电路图 维修手册.pdf

《Marantz-SR8002-avr-mz09042 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-SR8002-avr-mz09042 电路图 维修手册.pdf（5页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ09-042 Date: August 27, 2009 _ Model: SR8002/7002 Subject: Change of supplied Remote Controller * This Service Bulletin is only service information for the following minor improvement. This is not a call requiring a rework to be applied

2、to stock units. Symptom: The supplied Remote controller for SR8002/SR7002 will be discontinuing production soon. Therefore, we will supply a new Remote controller RC3001 from next production. Solution: 1. Detail of the production of SR8002/SR7002 1-1. When the stock of attached remote control (RC800

3、2SR) that exists in Factory ends, it changes to RC3001. 1-2. As for RC3001, making the operation equal with the RC8002SR can be done by changing Firmware. 1-3. Operation interchangeability table (Addendum Sheet) of RC8002SR and RC3001 is bundled. (Refer to attached detailed paper) 1-4. To identify i

4、t with Carton Box, identification Label is put on the upper part of Shipping Label. (Refer to attached detailed paper) 2. Modification of RC3001 for SR8002/SR7002 When you exchange the original RC3001, you have to update the firmware of new RC3001 with flysheet. Writer software: “Wizz it 3” Firmware

5、: “Firmware Default Configuration_SR7002-8002.mcf” Service Parts: “90M-ZK000760R” (Unit Kit REMOTE CONTROLLER RC3001) _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may co

6、ntain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be a

7、ccepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 How to confirm the new firmware of RC3001? 1. Press the button, and select from “Home” mode to “AMP” mode. _ CONFIDENTIALITY NOTICE: The information cont

8、ained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distri

9、bution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 2. Press the “Pag

10、e Scroll” button and choose the page to 006/009. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protect

11、ed from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the

12、misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 3. Please confirm that the Programmable soft button will be assigning the “THX”. (The Programmable soft button will be assigning the “RE-EQ” if the firmware of RC3001 is not updating.) _ CONFIDENTIALITY NOTICE: The informa

13、tion contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. A

14、ny distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. 4. Press the “Home” button. RC30

15、01 will be hanging to the Home mode. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disc

16、losure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document.