Marantz-CC4001-cd-mz07018 电路图 维修手册.pdf

《Marantz-CC4001-cd-mz07018 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-CC4001-cd-mz07018 电路图 维修手册.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ07-018 Date: February 22, 2007 _ Model: CC4001 Subject: Software Update Symptom: When playing CD audio tracks with the running times displayed as minus figures (ex. -00:01:00), the product does not pick up any audio while displaying the

2、minus figures. When a disc with many such tracks is being played back, the output is interrupted each time the minus figure is displayed. Solution: 1. Update the firmware in the microprocessor (U3). After the update, the version of the firmware is Ver: 18. 2. Firmware update data and part number 1)

3、Update Data: cc400118.hex (448KB) 2) Part No: 00M08CW499C02 3) Firmware Version: Buffer 18 bU 00 18 For the checking procedure, please refer to Page 7 in the Service Manual 6.SERVICE MODE. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARAN

4、TZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and

5、 the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended f

6、or the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or

7、 copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Parts: Ref# Description Part Number NA Microprocessor U3 Update 00M08CW499C02 Serial Number Range: Applicable serial number range: MZ0006xx000001 MZ0007xx006030 Already updated: MZ0007xx006031 later RadioFans.CN 收音机爱 好者资料库