Onkyo-TXDS797-avr-sm 电路图 维修手册.pdf
《Onkyo-TXDS797-avr-sm 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Onkyo-TXDS797-avr-sm 电路图 维修手册.pdf(57页珍藏版)》请在收音机爱好者资料库上搜索。
1、TX-DS797 SAFETY-RELATED COMPONENT WARNING! COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLACE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE M
2、EASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. SERVICE MANUALSERVICE MANUAL AV RECEIVER Black, Golden and Silver models MODEL TX-DS797 Ref. No. 3714 102001 BMDD BMPP,SMPP,BMPA,GMPA BMWT,GMWT,GMWR GMGT 120V
3、AC, 60Hz 230-240V AC, 50Hz 120/220-230V AC, 50/60Hz 220-230V AC, 50Hz STANDBY/ON OFFON POWER STANDBY PHONES MASTER VOLUME FMAMPHONOC DTAPEVIDEO 4VIDEO 5VIDEO 3VIDEO 2VIDEO 1DVD OFFZONE 2REC OUTDISPLAYDIMMER UPSAMPLING AUDIO SELECTOR ZONE 2()GRN REC()RED S VIDEOAUDIOVIDEOLRDIGITAL VCR 2VCR 1 VIDEO 5/
4、VIDEO CAM INPUT AV RECEIVER TX-DS797 CLEAR DSPA-FO RM LISTENING MODE MEMORYTHXSURROUNDDIRECTSTEREOMEMORYFM MODE ENTER RE TURN SETUP TUNI NG PRESET RadioFans.CN 收音机爱 好者资料库 TX-DS797 SPECIFICATIONS 100 watts per channel min. RMS at 8 ohms, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08%
5、total harmonic distortion. 130 watts min. RMS at 6 ohms, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion. 135 watts at 6 ohms 160 watts at 6 ohms 2 x? 250 watts at 3 ohms 2 x 210 watts at 4 ohms 2 x? 130 watts at 8 ohms 0.08% at rated power 0.08% at 1 Watt output 0.08%
6、at rated power 0.08% at 1 Watt output 60 at 8 ohms 2.5 mV, 50 kohms 200 mV, 50 kohms 200 mV, 50 kohms 36 mV, 50 kohms 0.5 Vp-p, 75 ohms 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms (Y) 0.28 Vp-p, 75 ohms (C) 1 Vp-p, 75 ohms (Y) 0.7 Vp-p, 75 ohms (PB,PR) 200 mV, 470 ohms 1 V, 470 ohms 100mV, 470 ohms 1 Vp-p, 75 o
7、hms 1 Vp-p, 75 ohms (Y) 0.28 p-p, 75 ohms (C) 1 Vp-p, 75 ohms (Y) 0.7 Vp-p, 75 ohms (PB,PR) 120 mV RMS at 1 kHz, 0.5% T.H.D. 10 Hz to 100 kHz : +1/-3 dB (CD in Direct mode) 20 Hz to 20 kHz : ? 0.8 dB ? 10 dB at 50 Hz ? 10 dB at 20,000 Hz 80 dB (IHF A, 5 mV input) AMPLIFIER SECTION Continuous Average
8、 Power output (FTC) All channels: Continuous Power output (DIN) Maximum Power output (EIAJ) Dynamic Power Output (Stereo) Total Harmonic Distortion: IM Distortion: Damping Factor: Input Sensitivity and Impedance PHONO: LINE (CD, TAPE, DVD, VIDEO 1-5): MULTICHANNEL INPUT (FRONT L/C/R, SURROUND L/R, S
9、URROUND BACK L/R): (SUBWOOFER): COAXIAL 1, 2, 3 (DIGITAL): DVD, VIDEO 1, 2, 3, 4, 5: COMPONENT VIDEO 1, 2: Output Level and Impedance Rec out (TAPE, VIDEO 1, 2): Pre out: ZONE 2 OUT: VIDEO (VIDEO 1, 2, MONITOR OUT, ZONE 2 OUT): COMPONENT VIDEO OUT: Phono Overload: Frequency Response: RIAA Deviation:
10、 Tone Control Bass: Treble: Signal-to-Noise Ratio (Stereo) Phono: CD/Tape:110 dB (IHF A, 0.5 V input) TUNER SECTION FM Tuning Range:87.5 108.0 MHz (50 kHz steps) Usable Sensitivity Mono:11.2 dBf, 1.0 u?V (75 ohms IHF) 0.9 u?V (75 ohms DIN) Stereo:17.2 dBf, 2.0 u?V (75 ohms IHF) 23u ? V (75 ohms DIN)
11、 50 dB Quieting Sensitivity Mono:17.2 dBf, 2.0 u?V (75 ohms) Stereo:37.2 dBf, 20 u?V (75 ohms) Capture Ratio:2.0 dB Image Rejection Ratio USA & Canadian models:40 dB Other area models:85 dB IF Rejection Ratio:90 dB Signal-to-Noise Ratio Mono:76 dB Stereo:70 dB Alternate Channel Attenuation:55 dB Sel
12、ectivity:50 dB (DIN) AM Suppression Ratio:50 dB Total Harmonic Distortion Mono:0.2% Stereo:0.3% Frequency Response:30 Hz 15 kHz, ? 1.0 dB Stereo Separation:45 dB at 1 kHz 30 dB at 100 Hz 10 kHz AM Tuning Range USA & Canadian models:530 to 1,710 kHz (10-kHz steps) European & Australian models: 522 to
13、 1,611 kHz (9-kHz steps) Worldwide models:531 to 1,602 kHz (9-kHz steps) 530 to 1,710 kHz (10-kHz steps) Usable Sensitivity:30 u?V Image Rejection Ratio:40 dB IF Rejection Ratio:40 dB Signal-to-Noise Ratio:40 dB Total Harmonic Distortion:0.7% GENERAL Power Supply USA & Canadian models:AC 120 V, 60 H
14、z European & Australian models: AC 230-240 V, 50 Hz Some Asian models:AC 220-230 V, 50/60 Hz Worldwide models:AC 220-230 and 120 V switchable, 50/60 Hz Power Consumption USA & Canadian models:6.8 A Other models:550 W Dimensions (W ? x H ? xD):435 ? x 175 ? x 459 mm 17-1/8 x? 6-7/8 x? 18-1/16 Weight
15、USA & Canadian models:35.9 lbs. Other models:17.3 kg REMOTE CONTROLLER Transmitter:Infrared Signal range:Approx. 16 ft., 5 meters Power supply:Two “AA” batteries (1.5 V ? x 2) Specifications and features are subject to change without notice. RadioFans.CN 收音机爱 好者资料库 TX-DS797 SERVICE PROCEDURES 1. Rep
16、lacing the fuses This symbol located near the fuses indicates that the fuse used is fast operating type. For continued protection against fire hazard, replace with same type fuse. For fuse rating refer to the marking adjacent to the symbol. Ce symbole indique que le fusible utlise est a rapide. Pour
17、 une protection permanente, nuntiliser que fusibles de meme type. Ce darnier est la qu le present symbol est appse. CIRCUIT NO. PART NO. DESCRIPTION F901 252199 F902 252077, 252243 or 252277 F903 252075, 252241 or 252275 F9501,F9502 252160 or 252254 252075, 252241 or 252275 F9503,F9504252158 or 2522
18、52 252073 or 252239 10A-UL/T-314,Fuse 4A-SE-EAK, 4A-SE-TL250V or 4A-SE-TL250V,Fuse 2.5A-SE-EAK, 2.5A-SE-TL250V or 2.5A-SE-TL250V,Fuse 2.5A-UL/T-237 or 2.5A-T/UL-ST2,Fuse 2.5A-SE-EAK, 2.5A-SE-TL250V or 2.5A-SE-TL250V,Fuse 1.6A-UL/T-237 or 1.6A-T/UL-ST2,Fuse 1.6A-SE-EAK or 1.6A-SE-TL250V,Fuse Note: :1
19、20V model only : European model only : Worldwide model only : Asian model only for 230V : 220V model only : Australian model only 2. To initialize the unit This device employs a microprocessor to perform various functions and operations. If interference generated by an external power supply, radio w
20、ave, or other electrical source results in accident which causes the specified operations and functions to operate abnormally. To perform a result, please follow the procedure below. 1.Press and hold down the VIDEO 1 button, then press the STANDBY/ON button. 2.After clear is displayed, the preset me
21、mory and each mode stored in the memory, such as surround, are initialized and will return to the factory setting. 3. Safety-check out (Only U.S.A. model) After correcting the original service problem, perform the following safety check before releasing the set to the customer. Connect the insulatin
22、g-resistance tester between the plug of power supply cord and screw on the back panel. Specifications: 3.3Mohm10% at 500V. 4. Memory Preservation This unit does not require memory preservation batteries. A built-in memory power back-up system preserv es the contents of the memory during power failur
23、es and even when the unit is unplugged. The unit must be plugged in order to charge the back-up system. The memory preservation period after the unit has been unplugged varies depending on climate and placement of the unit. On the average, memory contents are protected over a period of a few weeks a
24、fter the last time the unit has been unplugged. This period is shorter when the unit is exposed to a highly humid climate. Worldwide models are equipped with a voltage selector to conform with local power supplies. Be sure to set this switch to match the voltage of the power supply in your area befo
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Onkyo-TXDS797-avr-sm 电路图 维修手册 Onkyo TXDS797 avr sm 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf
Heathkit Ta17 Guitar Amplifier.gif
Diaz Texas Square Face.jpg


