Marantz-SR9600-avr-mz05035 电路图 维修手册.pdf

《Marantz-SR9600-avr-mz05035 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-SR9600-avr-mz05035 电路图 维修手册.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ05-035 Date: January 4, 2007 _ Model: SR9600 Subject: Software Update Symptom: 1. When using an analog signal input if the Function is changed to a digital input the analog, REC out does not output audio. 2. Status may not be correctly r

2、eturned via RS232C. 3. When in the same input function. If a 720P/1080i signal is input into component and a Video signal is input into CVBS or S-Video at the same time, the component output may be changed into video out. Solution: Update the MAIN, SUB, DSP flash and MRAC Microprocessor software. Th

3、e new software version contains the following: MAIN Build004 SUB Build0057 MRAC Build003 DSP CODE 05 03010116 Before updating please check the Microprocessor version. The version can be confirmed through the “SERVICE MODE”. Please refer to the Service Manual on page 11 for the procedure. _ CONFIDENT

4、IALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MA

5、RANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioF

6、ans.CN 收音机爱 好者资料库 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applic

7、able laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information conta

8、ined in this document. The contents of “SR9600_Main001_Sub005_MRAC003.zip” file are: 1) 00M11AJ499B04.mot (MAIN AND SUB MICROPROCESSOR). Please refer to the Service Manual on page 30 for the procedure. 2) 00M11AJ499F05.mot (MAIN AND SUB MICROPROCESSOR). Please refer to the Service Manual on page 30

9、for the procedure. 3) 00M11AJ499D03.mot (DSP flash MICROPROCESSOR). Please refer to the Service Manual on page 44 for the procedure. 4) 00M11AJ499G03.mot (MRAC MICROPROCESSOR). Please refer to the Service Manual on page 48 for the procedure. Attention: Dont start the update from the Zip file. Please

10、 copy it on your PC first and be sure to unzip the file before using it. Parts: Ref# Description Part Number NA Firmware update SR9600_Main001_Sub005_MRAC003.zip Serial Number Range: This problem applies to the following serial number: SR9600 applies to xx00 xxxxxxxxxx. Note: This improvement has done from xx02xxxxxxxxxx and later. RadioFans.CN 收音机爱 好者资料库