Marantz-SR5005-avr-dmfwriter 电路图 维修手册.pdf

《Marantz-SR5005-avr-dmfwriter 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-SR5005-avr-dmfwriter 电路图 维修手册.pdf（16页珍藏版）》请在收音机爱好者资料库上搜索。

1、 The Operating Manual for updating of A/V receiver/amplifier firmware Page 1 / 16 The Operating Manual for updating of marantz A/V receiver/amplifier firmware DFW (D&M Firmware Writer) Model Name SR5005/U, 5005/N Version DFW_0003_SR5005_(Rev.1.0.6) Date 2010-06-03 RadioFans.CN 收音机爱 好者资料库 The Operati

2、ng Manual for updating of A/V receiver/amplifier firmware Page 2 / 16 Index 1. Preparations before starting the operation: . .3 1.1 Preparation for the Personal Computer:.3 1.2 Preparations for the cables. .3 1.3 Connection of the A/V receiver/amplifier and PC .4 1.4 Install the D&M Firmware Writer.

3、4 2. Procedure of updating for firmware. .5 2.1 Notice:.5 2.2 Procedure of updating for firmware.5 2.3 Check the communication between A/V amplifire and PC.6 2.4 Start the firmware update .7 2.6 Complete the firmware update. .7 3. Confirming the firmwares number after upgraded. .8 4. Error massages

4、and countermeasurement. .910 5. Setting of “Run this program in compatibility mode” for Windows Vista.1113 6. Setting of “Run this program in compatibility mode” for Windows 7.1416 RadioFans.CN 收音机爱 好者资料库 The Operating Manual for updating of A/V receiver/amplifier firmware Page 3 / 16 1. Preparation

5、s before starting the operation: 1.1 Preparation for the Personal Computer: Minimum hardware and software requirements: Type PC/AT compatible CPU Intel Pentium/Celeron300MHz or faster RAM 256MB or more Free hard disc space 25MB or more OS Recommend OS: Windows XP Home Edition / Professional SP1 or m

6、ore * Confirmed languages: English, Japanese and German available. Other language is able to work in PC, but we dont confirm it. * “Windows Vista” and “Windows 7 (upper of Home Premium)” are able to update properly. * Window 2000 is impossible to use. Display resolution Super VGA (800 x600) or more.

7、 Port. Serial COM port (D-Sub 9pin) Communication speed RS-232C:115,200bps 1.2 Preparation for the cables. (1) Preparation for RS-232 cable Serial Straight Cable for RS-232C consisting of D-Sub 9P(female) and D-Sub 9P(female) cable. D-Sub 9P(male) and D-Sub 9P(male) Gender Changer. Note: There is th

8、e RS-232C(Male and Female) 9P cable like the following picture on the market. Then you dont need to use Gender Changer. D-Sub 9P(female) and D-Sub 9P(female) cable Gender Changer D-Sub 9P(male) and D-Sub 9P(male) RadioFans.CN 收音机爱 好者资料库 The Operating Manual for updating of A/V receiver/amplifier fir

9、mware Page 4 / 16 (2) Preparation for WRITING KIT Prepare RS-232C converter “8U-210100S WRITING KIT”. 1.3 Connection of the AV receiver and PC 1) Confirm the power on/off switch of the AV receiver is turning off. 2) Connect the RS-232C cable from PC with the AV receiver . PC AV receiver Serial Strai

10、ght Cable for RS-232C 232C terminal of rear panel The Operating Manual for updating of A/V receiver/amplifier firmware Page 5 / 16 1.4 Install the D&M Firmware Writer. 1) Please install “DFW_0003_SR5005_(Rev.1.0.6).exe” to any folder of your PC. 2) Please make shortcut icon on your PC. 2 Procedure o

11、f updating for firmware 2.1 Notice Please keep the following notice for firmware update. a) Keep the PC environment refer to 1.1. b) Avoid the communication cable from the electrical noise source. (E.g. telephone cable, AC line, a fluorescent light) c) Dont remove cable during update. d) Dont turn o

12、ff the power during update. e) Dont run other PC application during update. f) Stop the resident program on PC. g) Stop the screen saver ability on PC. h) Stop the power save ability on PC. i) In case of laptop PC, Use the AC adaptor. 2.2 Procedure of updating for firmware 2.2.1 Please initialize th

13、e unit. 1) Turn on the power of unit while pressing the SURR button and AUTO button simultaneously. 2) When FL Display will be indicated perfectly, please remove the SURR button and AUTO button. 2.2.2 Turn on the AV receiver/amplifier. Operate the following. Turn on the AV receiver. 1) Turn on the p

14、ower switch while simultaneously pushing the ENTER button and the RETURN button of the front panel. 3) Confirm the power indicator is red in the front panel. DFW_0003_SR 5005_(Rev.1.0.6 ).exe The Operating Manual for updating of A/V receiver/amplifier firmware Page 6 / 16 4) 2.2.3 Procedure of updat

15、ing for firmware by “DFW (D&M Firmware Writer) CAUTION!: When you use “Windows Vista” or “Windows 7”, please set up the “Run this program in compatibility mode” of page 1116 before updating. 2.2.4 Click the “shortcut icon” on your PC. 2.3 Check the communication between A/V amplifier and PC. 1) Clic

16、k the Load button, and select the “Update File”. 2) Select the serial port number of RS-232C in PC. 3) Click the Check Comm. button. 4) If connection is good, “Communication checks OK.” Message is indicated. 1) 2) 3) DFW_0003_SR 5005_(Rev.1.0.6 ).exe The Operating Manual for updating of A/V receiver

17、/amplifier firmware Page 7 / 16 5) If connection is not good, “Communication check NG!” message is indicated. If above is indicated, please confirm the following items. a) Please confirm the connection of A/V amplifier and PC properly. (Refer to item1.3) b) Please confirm selection of RS-232C in PC

18、correctly. (Refer to item 2.3-2) 2.4 Start the firmware update Click the Update button, then unit will be start updating the firmware. 2.5 Complete the firmware update 2.5.1 When Update utility is completed to update the firmware, “Update completed.” Message is indicated. 2.5.2 If you failed update

19、during Main CPU update, then you need to use a specific update procedure. The Operating Manual for updating of A/V receiver/amplifier firmware Page 8 / 16 2.6 Countermeasure: 1) Turn off the AC power of unit. 2) Turn on the AC power of unit while pressing the CURSOR LEFT button and RETURN button sim

20、ultaneously. (Power LED lights red.) 3) Please update the firmware of unit from item 2.4 by DFW (D&M Firmware Writer). 3 Confirming the firmwares number after update: After completion of the updating operation, the new version number can be confirmed by starting up amplifier according to the followi

21、ng procedure. With the following operation, A/V receiver/ amplifier can be set to the Flash-ROM Version-Number Confirmation Mode. Turn the power of A/V receiver/amplifier on, while holding both “RETURN” button and “STATUS” button on the front panel simultaneously. Every time the “STATUS” Button is p

22、ressed, version numbers of the MAIN, SUB, etc. are indicated on the front panel section in the following order. RETURN STATUS Turn ON the Power The Operating Manual for updating of A/V receiver/amplifier firmware Page 9 / 16 4 ERROR Message and countermeasure 4.1 Communication ERROR Cause: No commun

23、ication between A/V receiver/amplifier and PC. Countermeasure: Confirm RS-232C port number and Ethernet communication. 4.2 Difference of MODEL ID Cause: Firmware is not correct. Countermeasure: Please use and select proper firmware. 4.3 Message at Recovery mode Cause: The unit is updated at RECOVERY

24、 mode. Countermeasure: When you want to update the unit at RECOVERY mode, press the “Yes” button. When you do not update the unit at RECOVERY mode, press the “No” button. Tip!: When you choose “Yes” button, unit is updated all firmware of unit. The Operating Manual for updating of A/V receiver/ampli

25、fier firmware Page 10 / 16 4.4 Message about between normal firmware and upgraded firmware Cause: Inharmonious between normal firmware and upgraded firmware. Countermeasure: When you want to upgrade or downgrade the unit, press the “Yes” button. When you do not upgrade or downgrade the unit, press t

26、he “No” button. 4.5 Confirmation of backdating Cause: You would like to backdate the firmware of unit. Countermeasure: When you want to backdate the unit, press the “Yes” button. When you do not backdate the unit, press the “No” button. 4.6 Selection of “Update Notification” indicator at backdating

27、Cause: You press the “yes” button at above item 4.5. Countermeasure: Please turn off the “Update Notification” massage by Instruction Manual. When you backdate the firmware of unit, “Update Notification” indicator will be indicated. Then customers update the firmware of unit via DPMS. The firmware o

28、f unit will be backdated. The Operating Manual for updating of A/V receiver/amplifier firmware Page 11 / 16 5 Setting of “Run this program in compatibility mode” for Windows Vista 5.1.1 Click the short cut of “DFW_0003_SR5005_(Rev.1.0.6).exe” by right button of Mouse. 5.1.2 The property of “DFW_0003

29、_SR5005_(Rev.1.0.6).exe” will be indicated. DFW_0003_SR5 005_(Rev.1.0.6). exe The Operating Manual for updating of A/V receiver/amplifier firmware Page 12 / 16 5.1.3 Click the tab of ”Compatibility”, and click the of “Run this program in compatibility mode for ”. The Operating Manual for updating of

30、 A/V receiver/amplifier firmware Page 13 / 16 5.1.4 Select the “Windows XP (Service Pack2)”, and click the “OK” button. Dont select “Windows Vista” or “Windows 7” or others! 5.1.5 Go to item 2.2.4. The Operating Manual for updating of A/V receiver/amplifier firmware Page 14 / 16 6 Setting of “Run th

31、is program in compatibility mode” for Windows 7 6.1.1 Click the short cut of “DFW_0003_SR5005_(Rev.1.0.6).exe” by right button of Mouse. 6.1.2 The property of “DFW_0003_SR5005_(Rev.1.0.6).exe” will be indicated. DFW_0003_SR5 005_(Rev.1.0.6). exe The Operating Manual for updating of A/V receiver/ampl

32、ifier firmware Page 15 / 16 6.1.3 Click the tab of ”Compatibility”, and click the of “Run this program in compatibility mode for ”. The Operating Manual for updating of A/V receiver/amplifier firmware Page 16 / 16 6.1.4 Select the “Windows XP (Service Pack2)”, and click the “OK” button. Dont select “Windows Vista” or “Windows 7” or others! 6.1.5 Go to item 2.2.4.