Marantz-SR8002-avr-mz09008 电路图 维修手册.pdf

《Marantz-SR8002-avr-mz09008 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-SR8002-avr-mz09008 电路图 维修手册.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ09-008 Date: February 18, 2009 _ Model: SR7002, SR8002 Subject: Software Update Information Symptom: 1. The HDCD indicator will not light up when the unit is switched from the function of playing HD-Audio (eg. DTS-Master Audio) via HDMI

2、to that of playing HDCD input via SPDIF. 2. On SR7002N and SR8002N, the “#” character used for RDS will turn into “II”. 3. When the HDMI connector is slowly inserted with the projector made by Epson etc., HDMI might not be linked. Solution: The MAIN CPU and HDMI CPU software must be updated. First,

3、please check the version of the current firmware in reference to SERVICE MODE of the Service Manual. After performing the update, check the indicated firmware version. For information on how to rewrite the firmware, open the Service Manual and refer to “7. UPDATE FIRMWARE”. _ CONFIDENTIALITY NOTICE:

4、 The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service

5、Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者

6、资料库 Please check the version of the firmware and, if any of the above is found yet to be updated, make sure to perform the latest update. Update software and Part no. 1) Firmware Main: sr8002Main090121_1.mot Parts No: 00M36CW499A08 (For how to rewrite, see the Service Manual on Page 21.) 2) Firmware

7、 HDMI: HDMI_REPV3x090122h39.mot Parts No: 00M36CW499B06 (For how to rewrite, see the Service Manual on Page 31.) Serial Number Range: This problem applies to the following serial number. 1) SR7002, SR8002 applies to MZ07xxxxxxxxx (Service code 07 and earlier). This improvement has been done in produ

8、ction from serial number MZ08xxxxxxxxx (Service code 08 and after). _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential

9、 and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库