Marantz-UD9004-sacd-mz10048 电路图 维修手册.pdf

《Marantz-UD9004-sacd-mz10048 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-UD9004-sacd-mz10048 电路图 维修手册.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ10-048 Date: September 15, 2010 _ Model: UD9004 Subject: Correction of the firmware of DPMS (D&M Product Management Server). Countermeasure is applicable only upon claim from the customer. Symptom: 1) When BD software Ole Bull Violin Con

2、certos was reproduced, the mShuttle function might not work. 2) When BD software Clash of the Titans was reproduced, a sound might be heard. 3) When DVD software 15 Minutes was reproduced, the unit might stop. 4) DVD disc AVATAR made in Germany might be not reproduced. After inserting it only shows

3、PLAY in Display. Solution: We corrected the firmware so that no malfunction occurs. Please do not use a Proxy for updating in the Network environment! If the customer uses setting of Proxy, the unit doesnt update the firmware properly. If the customer updated the firmware once via DPMS or CD-R, cust

4、omer can update the firmware with Proxy in the Network environment. Caution: It is necessary to initialize the unit before the update work begins. The customer has to initialize their BD/DVD Player. Please update the firmware after you confirm this matter to the customer beforehand. Updating the fir

5、mware *For update procedures, please see manual. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protect

6、ed from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the

7、misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 METHOD OF UPDATE by CD-R with firmware Please record each program file on a blank CD-R separately, and update the unit upon claim. * Program Files to be supplied in SDI: Notice, upon recording the Disc: a) When recording t

8、he supplied file on the blank CD-R, the format shall be ISO9660 and the session shall be CLOSE. b) When recording the supplied file on the disc, please use the lowest recording speed that is available on your PC. If the file is recorded at a higher speed, the rewriting operation may fail due to impr

9、operly recorded data on the disc. Rewriting procedures of the SYSTEM ROMs. (1) Download the 9004_SYS.ROM firmware in SDI. (2) Please make DM_FM_UP folder on PC. (3) Please insert the 9004_SYS.ROM firmware into DM_FM_UP folder. (4) Please burn the CD-R by at once mode. (5) Turn the Power Supply of th

10、e unit on. Press the OPEN/CLOSE button and open the Disc Tray. (6) Put the recorded CD-R on the Disc Tray and press the buttons on the remote control in the order of 7, 9, 2 and ENTER. (7) The Disc Tray will close automatically. (8) The FL Display indicates progress of updating. Time necessary for u

11、pdate: approximately 5 min. (9) The unit turns off and turns on, and then NO DISC is indicated. (10) The new firmware is installed completely. (11) Press the OPEN/CLOSE button and open the Disc Tray. (12) Take out the CD-R from the Disc Tray. (13) When HD indicator lights on FL Display, Please go to

12、 (6) and update again. (14) Take out the CD-R from the Disc Tray. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential a

13、nd may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss re

14、sulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 Rewriting procedures of the FE/BE ROMs. (1) Download the DcmUpdate.fw and DcmAuthentication firmware in SDI. (2) Please insert the DcmUpdate.fw and DcmAuthentication firmware into the Root directory. (3) P

15、lease burn the CD-R by at once mode. (4) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc Tray. (5) Put the recorded CD-R on the Disc Tray and press the buttons on the remote control in the order of 7, 9, 2 and RETURN. (6) The Disc Tray will close automatically. (7

16、) The FL Display indicates LOADING, then progress of updating. Time necessary for update: approximately 30 min. (8) The new firmware is installed completely. (9) The Disc Tray opens automatically. (10) Take out the CD-R from the Disc Tray. Rewriting procedures of the DSP1. (1) Download the 9004_AD1.

17、ROM firmware in SDI. (2) Please make DM_FM_UP folder on PC. (3) Please insert the 9004_AD1.ROM firmware into DM_FM_UP folder. Root - DM_FM_UP |_9004_AD1.ROM (4) Please burn the CD-R by at once mode. (5) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc Tray. (6) Put

18、 the recorded CD-R on the Disc Tray and press the buttons on the remote control in the order of 7, 9, 2 and ENTER. (7) The Disc Tray will close automatically. (8) The FL Display indicates progress of updating. Time necessary for update: approximately 3 min. (9) The unit turns off and turns on, and t

19、hen NO DISC is indicated. (10) The new firmware is installed completely. (11) Press the OPEN/CLOSE button and open the Disc Tray. (12) Take out the CD-R from the Disc Tray. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Se

20、rvice Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information

21、 it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 Confirmation of the version: 1) Press the OPEN/CLOSE button and open the Disc Tray. 2) Remove the

22、Disc from the Tray. 3) Please confirm! NO DISC on the FL Display. 4) Please turn off the power and unplug the AC cord. 5) Please insert the AC cable of unit into the power outlet while pressing the OPEN/CLOSE and PLAY buttons on the unit simultaneously. 6) The indication of PLAY and PAUSE will be di

23、splayed on FL Display. 7) Please confirm! NO DISC on the FL Display, and wait 10 seconds. 8) Press the buttons on the remote control in the order of 3, 2, 6 and 5. 9) The version of the firmware will be indicated on the FL Display. 10) The firmware list will also be shown on connected TV (GUI). 11)

24、Push the UP button of cursor button, version of the each firmware will be indicated on the FL Display. The version of new firmware Serial Number Range: Please apply the above modification to the models in the following serial number range. *000001 *000230 _ CONFIDENTIALITY NOTICE: The information co

25、ntained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document.