Marantz-SR9600-avr-mz06003 电路图 维修手册.pdf

《Marantz-SR9600-avr-mz06003 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-SR9600-avr-mz06003 电路图 维修手册.pdf（16页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ06-003 Date: January 2, 2007 _ Model: SR9600 Subject: Software Update Symptom: 1. After pressing STANDBY- POWER OFF - POWER ON button, you cannot Power ON the set by the remote controller for 15 seconds. 2. When selected “i.LINK FUNCTION

2、”, AUTO PLAY/Auto Input Select function will not work sometime. 3. When selected “TUNER FUNCTION”, input display remains being TUNER in Auto Input Select Solution: 1. Update MAIN, SUB and 1394 Flash Microprocessor software. New software version is as follows. 1) MAIN Build006 2) SUB Build007 3) *139

3、4Flash (The version of 1394 Flash is not displayed.) 4) DSP CODE 05 03010116 5) MRAC Build003 Before updating please check the Micro processor version. It can be confirmed through the “SERVICE MODE”. Please refer to page 11 of the Service Manual for the procedure. 2. File name: SR9600_Main006_Sub007

4、_1394 Flash.zip (2.30 MB) The contents of “SR9600_Main006_Sub007_1394Flash.zip” file are: 1) 00M11AJ499B06.mot (MAIN AND SUB MICROPROCESSOR) Please refer to the Service Manual on page 30 for the procedure. 2) 00M11AJ499F07.mot ( MAIN AND SUB MICROPROCESSOR) Please refer to the Service Manual on page

5、 30 for the procedure. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under a

6、pplicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information

7、contained in this document. RadioFans.CN 收音机爱 好者资料库 3) 00M11AJ499J03(iLINK) (i.LINK MICROPROCESSOR) Please refer to “UPDATE i.LINK PROCEDURE page1/11 to 11/11. 4) 00M11AJ499D03 (DSP flash MICROPROCESSOR) Please refer to the Service Manual on page 44 for the procedure. 5) 00M11AJ499G03.mot (MRAC MICR

8、OPROCESSOR) Please refer to the Service Manual on page 48 for the procedure. Attention -1: Please copy the zipped file to your PC and unzip it before using. Attention -2: DSP CODE 05 03010116 and MRAC Build003 is the same as Service Bulletin MZ05-035, If the update has already been completed, updati

9、ng of the DSP and MRAC would be unnecessary. If the update has not been completed yet, please update as outlined in steps 1), 2), 3), 4) and 5). i.LINK UPDATE PROCEDURE NECESSARY EQUIPMENT: Windows PC with i.LINK (IEEE1394) port i.LINK (IEEE1394) Cable (4Pin - 4Pin or 4Pin 6Pin). Update Tool, Update

10、 data and i.LINK (IEEE1394) driver for PC (fup1394.exe, armsr051025a.mot, marantz_FIRM_SUB_AMP_051003A.mot, 1394diag.inf etc. in 00M11AJ499J03 (i.LINK) folder) PROCEDURE FOR INSTALLATION OF I.LINK DRIVER Create an SR9600_iLINK folder on the C:(Root) of your PC. Copy the SR9600_iLINK folder the FUP13

11、94 folder, armsr051025a.mot and marantz_FIRM_SUB_AMP_051003A.mot of 00M11AJ499J03 (iLINK) into the newly created folder. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may

12、 contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will b

13、e accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 Connect the PC and SR9600 with an i.LINK cable. Power On the unit. The “Found New Hardware” Wizard will launch. Note: If The Found New Hardware Wizard

14、 does not launch, restart the PC. (Keeping the iLINK cable connected) Click Next to continue. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that i

15、s privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for a

16、ny damage, injury or loss resulting from the misuse of the information contained in this document. . RadioFans.CN 收音机爱 好者资料库 Choose “Display a list of the known drivers for this device so that I can choose a specific driver”, then click Next _ CONFIDENTIALITY NOTICE: The information contained in thi

17、s document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disc

18、losure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Click Browse. _ CONFIDENTIALITY NOTICE: The informati

19、on contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any

20、 distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Select 1394diag.inf in the 1394dri

21、ver folder. And click Open. Click OK. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from dis

22、closure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of t

23、he information contained in this document. Click Next. Click Next. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential

24、and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss r

25、esulting from the misuse of the information contained in this document. Click Finish. WRITING PROCEDURE Double click the fup1394.exe file in the FUP1394 folder. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Center

26、s and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains

27、 is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Launch the Firmware Update Tool (MARANTZ: 000678). Choose ARM in the S/W dropdown box. Click Select. Select armsr051025a.mot in the SR

28、9600_iLINK folder. Click Open. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure

29、 under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the info

30、rmation contained in this document. Click Send. Click OK. Firmware is written the i.LINK. The writing of firmware takes about 2 minutes and 30 seconds. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and the

31、ir employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohi

32、bited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Click OK. Choose the Sub CPU option in the S/W dropdown box. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended f

33、or the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or

34、 copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Click the Select. Select the Marantz_FIRM_SUB_AMP_051003A.mot in the SR9600_i

35、LINK folder. Click Open. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under

36、 applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the informatio

37、n contained in this document. Click Send. Click OK. Firmware is written to the i.LINK flash memory. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information

38、that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ

39、 for any damage, injury or loss resulting from the misuse of the information contained in this document. The writing of firmware takes about 2 minutes and 30 seconds. Click OK. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorize

40、d Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the informa

41、tion it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. Click Close. Disconnect the i.LINK cable from the unit and turn the unit OFF. CHECK PROCEDURE Turn on the unit. Updati

42、ng is successful when the front display shows “LINK CHECK”. If “CHECK SUB1394” is displayed on the front display the writing procedure failed. You will need to redo the WRITING PROCEDURE. PRODUCT RESET Reset of the unit is required after updating. To reset the back up memory of the unit into the def

43、ault status, follow the procedure below. Note: Please do not connect any wires except the AC cord. 1. Turn on the unit and press MRAC and PURE DIRECT button simultaneously more than 3 seconds. 2. After DEFAULT is displayed on FLD, then CLEAR MEMORY is displayed on FLD, EEPROM is cleared to the defau

44、lt status, The _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No r