Marantz-SR8001-avr-mz07014 电路图 维修手册.pdf

《Marantz-SR8001-avr-mz07014 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-SR8001-avr-mz07014 电路图 维修手册.pdf（2页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ07-014 Date: February 9, 2007 _ Model: SR7001, SR8001 Subject: Software Update Information. Symptom: 1. Originally the product was designed that if the speakers short, the unit automatically detects the error and then turns the relay on.

2、 Now, in order to improve the safety of the protective operation, once a short occurs, the product goes into standby mode instead of turning on and can only be powered on again by Main power-OFF and ON. 2. When the unit is connected to the Sony PlayStation3 with HDMI and plays an SACD, there is no a

3、udio output. 3. When more than 6 channels are connected in HDMI M-PCM, there is no indication of or audio output from the 7th and 8th CHs. 4. When the unit receives the command XDP:1 to switch over the XS DISP mode, with the XM ANTENNA unplugged, it can respond with XDP:2, the next number up. 5. The

4、 product may not respond to the following RS232C commands: EX/ES SUR:0A, THX THX:3THX:9, THX ON THX:2. 6. While playing back a DTS 96/24 signal, it transmits a status reply at an RS232C sampling rate of 48KHz SFQ:3 instead of 96KHz SFQ:5, which it should be. 7. When the product is connected to a Mar

5、antz LC3701 a Marantz PD4201 or a Panasonic PT-AX100 with HDMI, the onscreen image can be tinged with pink. Solution: 1. The MAIN and HDMI microprocessors need to be updated. First, please check the version of each firmware and DSP code in reference to the Service Manual on Page 10 of the Service Mo

6、de. . _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws an

7、d terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this

8、 document. RadioFans.CN 收音机爱 好者资料库 2. Firmware and part number file content: SR8001_Main0701221_Hdmi050.zip (425KB) a) Firmware Ver: SR8001_0701221.mot (See the Service Manual on Page 40 for the procedure.) Parts No: 00M06CW499A03 b) Firmware Ver: HDMI_REPV2x070110h50.mot (See the Service Manual on

9、Page 50 for the procedure.) Parts No: 00M06CW499B04 Check the firmware version before updating. If your unit needs to be updated, please make sure to perform the latest update. Parts: Ref# Description Part Number NA SR8001_0701221.mot 00M06CW499A03 NA HDMI_REPV2x070110h50.mot00M06CW499B04 Serial Num

10、ber Range: The update is required of the following serial numbers: SR7001 ServiceCode: 02 * Service Code (part of aa in S/N): MZaaxxxxxxxxxx SR8001 ServiceCode: 02 * Service Code (part of aa in S/N): MZaaxxxxxxxxxx The following serial numbers have already been updated: SR7001 ServiceCode: 03 * Serv

11、ice Code (part of aa in S/N): MZaaxxxxxxxxx SR8001 ServiceCode: 03 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential

12、and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. * Service Code (part of aa in S/N): MZaaxxxxxxxxxx RadioFans.CN 收音机爱 好者资料库