Marantz-UD9004-sacd-mz10020 电路图 维修手册.pdf

《Marantz-UD9004-sacd-mz10020 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Marantz-UD9004-sacd-mz10020 电路图 维修手册.pdf（4页珍藏版）》请在收音机爱好者资料库上搜索。

1、 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : MZ10-020 Date: June 3, 2010 _ Model: UD9004 Subject: Correction of the firmware of DPMS Countermeasure is applicable only upon claim from the customer. Symptom: 1) The sound of analog-output is distorted and can not play normally when play

2、ing the multi channel of a specific BD disc titled 20th Anniversary DREAMS COME TRUE CONCERT TOUR 2009. 2) When BD software THE HAPPENING was reproduced, a menu screen does not output it after updating the unit for BD disc AVATAR. 3) We are modified unit by indication from the DVD Copy Control Assoc

3、iation (DVD CCA). Solution: We corrected the firmware so that no malfunction occurs. Please do not use a Proxy for updating in the Network environment! If customer uses setting of Proxy, the unit doesnt update the firmware properly. If the customer updated the firmware once via DPMS or CD-R, custome

4、r can update the firmware with Proxy in the Network environment. Caution: It is necessary to initialize the unit before the update work begins. The customer has to initialize their BD/DVD Player. Please update the firmware after you confirm this matter to the customer beforehand. Updating the firmwa

5、re Please refer to the Service manual. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from di

6、sclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of

7、the information contained in this document. RadioFans.CN 收音机爱 好者资料库 METHOD OF UPDATE by CD-R with firmware We will supply the following program files for updating the subject models. Therefore, please record each program file on a blank CD-R separately, and update the unit upon claim. Caution: The u

8、pdate time might change depending on the situation of the DPMS server and the speed of the Internet environment of the customers house. Remark!: Recovery of the firmware when unit indicates NC Firm on the FL Display. If the FL Display shows NC Firm isnt turning into the following version of the firm

9、ware during the rewriting operation, wait longer than 10 minutes. Then, pull out the AC cable from AC socket in the wall, wait 10 seconds, and then insert AC cable to AC socket in the wall. The unit will start recovering the firmware of System micro processor. After that, please update the firmware

10、of unit via DPMS again. * Program Files to be supplied: Note: Upon recording the Disc: a) When recording the supplied file on the blank CD-R, the format shall be ISO9660 and the session shall be CLOSE. b) When recording the supplied file on the disc, please use the lowest recording speed that is ava

11、ilable on your PC. If the file is recorded at a higher speed, the rewriting operation may fail due to improperly recorded data on the disc. Rewriting procedures of the SYSTEM ROMs. (1) Download the 9004_SYS.ROM firmware in SDI. (2) Please make DM_FM_UP folder on PC. (3) Please insert the 9004_SYS.RO

12、M firmware into DM_FM_UP folder. Root - DM_FM_UP |_9004_SYS.ROM (4) Please burn the CD-R by at once mode. (5) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc Tray. _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive u

13、se by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this d

14、ocument and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. RadioFans.CN 收音机爱 好者资料库 _ CONFIDENTIALITY NOTICE: The information contained in this document is

15、 intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, disse

16、mination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document. (6) Put the recorded CD-R on the Disc Tray and press the buttons o

17、n the remote control in the order of 7, 9, 2 and ENTER. (7) The Disc Tray will close automatically. (8) The FL Display indicates progress of updating. Time necessary for update: approximately 5 min. (9) The unit turns off and turns on, and then NO DISC is indicated. (10) The new firmware is installe

18、d completely. (11) Press the OPEN/CLOSE button and open the Disc Tray. (12) When HD indicator does not light on FL Display, Please go to next STEP. (13) When HD indicator lights on FL Display, Please go to (6) and update again. (14) Take out the CD-R from the Disc Tray. Rewriting procedures of the F

19、E/BE ROMs. (1) Download the DcmUpdate.fw and DcmAuthentication firmware in SDI. (2) Please insert the DcmUpdate.fw and DcmAuthentication firmware into the Root directory. Root |_DcmUpdate.fw |_DcmAuthentication (3) Please burn the CD-R by at once mode. (4) Turn the Power Supply of the unit on. Press

20、 the OPEN/CLOSE button and open the Disc Tray. (5) Put the recorded CD-R on the Disc Tray and press the buttons on the remote control in the order of 7, 9, 2 and RETURN. (6) The Disc Tray will close automatically. (7) The FL Display indicates LOADING, then progress of updating. Time necessary for up

21、date: approximately 30 min. (8) The new firmware is installed completely. (9) The Disc Tray opens automatically. (10) Take out the CD-R from the Disc Tray. Rewriting procedures of the DSP1. (1) Download the 9004_AD1.ROM firmware in SDI. (2) Please make DM_FM_UP folder on PC. (3) Please insert the 90

22、04_AD1.ROM firmware into DM_FM_UP folder. Root - DM_FM_UP |_9004_AD1.ROM (4) Please burn the CD-R by at once mode. (5) Turn the Power Supply of the unit on. Press the OPEN/CLOSE button and open the Disc Tray. RadioFans.CN 收音机爱 好者资料库 (6) Put the recorded CD-R on the Disc Tray and press the buttons on

23、 the remote control in the order of 7, 9, 2 and ENTER. (7) The Disc Tray will close automatically. (8) The FL Display indicates progress of updating. Time necessary for update: approximately 3 min. (9) The unit turns off and turns on, and then NO DISC is indicated. (10) The new firmware is installed

24、 completely. (11) Press the OPEN/CLOSE button and open the Disc Tray. Confirmation of the version: (1) Press the OPEN/CLOSE button and open the Disc Tray. (2) Remove the Disc from the Tray. (3) Please confirm! NO DISC on the FL Display. (4) While pushing the PLAY and OPEN/CLOSE button, turn on the p

25、ower of unit. (5) Plug in AC CORD. (6) The indication of PLAY and PAUSE will be displayed on FL Display. (7) Please confirm! NO DISC on the FL Display, and wait 10 seconds. (8) Press the buttons on the remote control in the order of 3, 2, 6 and 5. (9) The version of the firmware will be indicated on

26、 the FL Display. (10) The firmware list will also be shown on connected TV (GUI). (11) Push the UP button of cursor button, version of the each firmware will be indicated on the FL Display. The version of new firmware Serial Number Range: Please apply the above modification to the models in the foll

27、owing serial numbers. *000001 *000200 _ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by MARANTZ Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from dis

28、closure under applicable laws and terms of the MARANTZ Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by MARANTZ for any damage, injury or loss resulting from the misuse of the information contained in this document.