Pioneer-DJM350W-mix-sup电路图 维修手册.pdf
《Pioneer-DJM350W-mix-sup电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Pioneer-DJM350W-mix-sup电路图 维修手册.pdf(8页珍藏版)》请在收音机爱好者资料库上搜索。
1、ORDER NO. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra
2、Road, #04-01, Singapore 159936 PIONEER CORPORATION 2010 RRV4156 K-ZZZ DEC 2010 Printerd in Japan DJ MIXER DJM-350-W ModelOrder No.Remarks DJM-350/SYXJ8RRV4063 This product is the same as the DJM-350, except for the colors. The major changes are as shown below. Exterior panels (control panel, front p
3、anel, side panels, and rear panel): Changed to white LED colors: Green changed to blue Amber (LEVEL meters: CH1, CH2, and Master) changed to white Amber (FADER START CH1 and CH2) changed to blue When replacing the above-mentioned parts, be sure to use the parts described in this manual. Two of the f
4、our master effects have been changed, as follows: GATE to NOISE, CRUSH to SHORT ECHO With these changes, the firmware becomes different from that for the base model. With the name modification of the master effect, the button to press at Test Mode-on is changed from GATE to NOISE. (Refer to P3.) Thi
5、s service manual should be used together with the following manual(s): THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). ModelTypePower RequirementRemarks DJM-350-WSYXJ8AC 220 V to 240 V DJM-350-WUXJCBAC 120 V DJM-350-WLXJAC 110 V to 120 V or 220 V to 240 V DJM-350-WAXJ5AC 220 V to 24
6、0 V DJM-350-WKXJ5AC 220 V RadioFans.CN 收音机爱 好者资料库 1. SERVICE PRECAUTIONS 1.1 About the New slider knob The new slider knob adopted by this product is designed so that it is not pulled out easily. Therefore, the method for removing the slider knob is different from the conventional method; it can onl
7、y be pulled out after part 1 is removed. Component formation locked by parts 1 and 3 shown below. 1 Slider knob 2: DAC2770 2 Slider knob 1: DAC2769 3 Slider knob stopper: DNK5888 Distinguishing method New slider knob: The line of the knob does not reach the bottom on one side. Conventional slider kn
8、ob: The line of the knob reaches the bottom on the both sides. The line reaches the bottom. The line does not reach the bottom. Disassembly and reassembly 1 Find the side on which the line reaches the bottom. 2 Insert a pair of needle-nose pliers or a similar tool beneath the line then push the slid
9、er knob 2 upward. To protect the panel from being scratched, use protective material. 3 Remove slider knob 2. 4 Pull out slider knob 1. 1 2 3 Protective material (a piece of cardboard, etc.) 5 Remove the slider knob stopper. Note on reassembling the slider knob stopper When reassembling a slider kno
10、b stopper, be careful of the stopper attachment position. Normally, attach it to the right side for a vertical slider, and to the front side for a horizontal slider. RadioFans.CN 收音机爱 好者资料库 3 DJM-350-W 5678 5678 C D F A B E 1.3 About the Firmware The firmware of this product is different from that f
11、or the base model, because two main effects differ between these models. However, these two types of firmware can be updated to either of the types, because both types of firmware are designed to be able to be installed in either of the two models. This is to respond to the needs of users who may wi
12、sh to select the effects functions at their discretion. The labels on which effect names are printed are enclosed with the product so that a user who has updated the firmware for this product to that for the base model can stick them on the product. (Part No.: DRW2480) How to handle during servicing
13、 First check the type of firmware and its version. In principle, before returning the repaired product to the user, update the firmware of the product to the latest version of the firmware that was installed when the product was received to be repaired. If the type of firmware cannot be confirmed, u
14、pdate to the latest version of the firmware corresponding to the type of model. The model-type-based differences with regard to firmware are as shown in the table below. DJM-350-WDJM-350Item Indication of the model name upon power-on The LEVEL meter LEDs show as “D,” “J,” “M,” “-,” “3,” “5,” “0.” Th
15、e LEVEL meter LEDs show as “D,” “J,” “M,” “-,” “3,” “5,” “0,” “W.” Types of Master Effects GATE CRUSH JET FILTERNOISE SHORT ECHO JET FILTE ndicated as Ver 1.xx (starting with “1) Indicated as Ver 5.xx (starting with “5) Indication of the firmware version Version check method (disclosed to users) Whi
16、le holding the CRUSH and FILTER keys pressed, turn the unit on. The version is repeatedly indicated with the LEVEL meter LEDs. While holding the SHORT ECHO and FILTER keys pressed, turn the unit on. The version is repeatedly indicated with the LEVEL meter LEDs. Note on Replacement of the MAIN Assy T
17、he firmware for a MAIN Assy service part may not be the latest. When replacing the MAIN Assy, be sure to update the firmware to the latest, following “How to handle during servicing,” mentioned above. 1.2 About the Test Mode-on CH-1 FADER START button NOISE button CH-1 CUE button POWER ON Test Mode
18、: ON NOISE With the name modification of the master effect, the button to press at Test Mode-on is changed from GATE to NOISE. RadioFans.CN 收音机爱 好者资料库 4 DJM-350-W 1234 C D F A B E 1234 2.1 CONTRAST TABLE 2. CONTRAST OF MISCELLANEOUS PARTS Parts marked by NSP are generally unavailable because they ar
19、e not in our Master Spare Parts List. The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Screws adjacent to mark on product are used for disassembly. For the applying amount of lu
20、bricants or glue, follow the instructions in this manual. (In the case of no amount instructions, apply as you think it appropriate.) Nos. indicate the pages and Nos. in the service manual for the base model. NOTES: When ordering resistors, first convert resistance values into code form as shown in
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Pioneer-DJM350W-mix-sup 电路图 维修手册 Pioneer DJM350W mix sup 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


