HarmanKardon-HK3380-rec-sm2电路图 维修手册.pdf
《HarmanKardon-HK3380-rec-sm2电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《HarmanKardon-HK3380-rec-sm2电路图 维修手册.pdf(30页珍藏版)》请在收音机爱好者资料库上搜索。
1、SPEAKER 2 SPEAKER 1PHONO CD FM VID 1 TAPE M. VID 2 AMVID 3 MEMORYPRESET SLEEP AUTOMUTERDSPTYCTRTTATUNEDSTEREO HK 3380 HK3480 Stereo Receiver SERVICE MANUAL Power for the Digital Revolution RadioFans.CN 收音机爱 好者资料库 TECHNICAL SPECIFICATIONS HK3380 Technical Specifications HK3380/230 Audio Section Stere
2、o Mode Continuous Average Power (FTC) 80 Watts per channel, 20Hz 20kHz 0.07% THD, both channels driven into 8 ohms 100 Watts per channel, 20Hz20kHz 80dB IF Rejection100dB AM Tuner Section Frequency Range5201710kHz Signal-to-Noise Ratio40dB Usable SensitivityLoop: 500V/M Distortion1kHz, 50% Mod: 0.8%
3、 Selectivity10kHz: 25dB Video Section Television SystemNTSC/PAL/SECAM Signal FormatComposite Input Level1Vp-p Input Impedance75 ohms, unbalanced Sync PolarityNegative Output Level1Vp-p Output Impedance75 ohms, unbalanced Video Frequency Response10Hz 10MHz General Power RequirementAC 230V/50Hz Power
4、Consumption3W standby, 200W maximum (both channels driven) Dimension (Max) Width442mm Height168mm Depth382mm Weight9.5kg Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis. All features and specifications are subject to change without not
5、ice. Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated. RadioFans.CN 收音机爱 好者资料库 TECHNICAL SPECIFICATIONS HK3480 Technical Specifications HK3480 Audio Section Stereo Mode Continuous Average Power (FTC) 100 Watts per channel,
6、20Hz20kHz 0.07% THD, both channels driven into 8 ohms 135 Watts per channel, 20Hz20kHz 80dB IF Rejection100dB AM Tuner Section Frequency Range5201710kHz Signal-to-Noise Ratio40dB Usable SensitivityLoop: 500V/M Distortion1kHz, 50% Mod: 0.8% Selectivity9kHz: 25dB General Power RequirementAC 230V/50Hz
7、Power Consumption72W idle, 470W maximum (both channels driven) Dimension (Max) Width442mm Height156mm Depth415mm Weight12.1kg Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis. All features and specifications are subject to change withou
8、t notice. Harman Kardon is a registered trademark, and Power for the digital revolution is a trademark, of Harman Kardon, Inc. VMAx is a registered trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license. RadioFans.CN 收音机爱 好
9、者资料库 DISASSEMBLY PROCEDURES TOP-CABINET(21) REMOVAL 1. Remove 13 screws(S1) and then remove the Top-cabinet. FRONT PANEL ASSY REMOVAL 1. Remove the Top-cabinet, referring to the previous step. 2. Disconnect the lead wire(BN71-12P,BN72-5P) on the Tone PCB(38) from connector(CN71,CN72) on the Main PCB
10、(44). 3. Disconnect the lead wire(BN82-7P) on the Front PCB(37) from connector(CN82) on the Main PCB(44). 4. Disconnect the connector(CN81-20P wire assy) on the Front PCB(37) from connector(CN81) on the Main PCB(44). 5. Disconnect the lead wire(BN73-3P) on the Phone PCB(40) from connector(CN73) on t
11、he Main PCB(44). 6. Disconnect the lead wire(BN89-7P) on the Front PCB(37) from connector(CN73) on the Download PCB(44). 7. Remove 1 screw(S10) and then lead wire(JW73-2P) on the Phone PCB(40). 8. Remove 1 screw(S10) and then lead wire(JW72-1P) on the Tone PCB(38). 9. Remove 9 screws(S1) and then re
12、move the Front Panel ASSY. TONE PCB(38) REMOVAL 1. Remove the Top-cabinet, referring to the previous step. 2. Remove the Front Panel ASSY, referring to the previous step. 3. Pull out the Volume Knob ASSY & 3 Rotary Knobs(5). 4. Remove 9 screws(S1,S11) and then remove the Tone PCB(38). 5. Disconnect
13、the lead wire(BN83-4P) from connector(CN83) on the Tone PCB(38). PHONE PCB(40) REMOVAL 1. Remove the Top-cabinet, referring to the previous step. 2. Remove the Front Panel ASSY, referring to the previous step. 3. Remove 2 screws(S2,S3) and then remove the Phone PCB(16). POWER LED PCB(39) REMOVAL 1.
14、Remove the Top-cabinet, referring to the previous step. 2. Remove the Front Panel ASSY, referring to the previous step. 3. Remove 2 screws(S2) and then remove the Power led PCB(39). 4. Disconnect the lead wire(BN84-4P) from connector(CN84) on the Power led PCB(39). FRONT PCB(37) REMOVAL 1. Remove th
15、e Top-cabinet, referring to the previous step. 2. Remove the Front Panel ASSY, referring to the previous step. 3. Remove the Tone PCB(38), referring to the previous step. 4. Remove the Phone PCB(40), referring to the previous step. 5. Remove the Power led PCB(39), referring to the previous step. 6.
16、Remove 13 screws(S2) and then remove the Front PCB(37). TUNER MODULE(34) REMOVAL 1. Remove the Top-cabinet, referring to the previous step. 2. Disconnect the connector(CON1-Card cable) from connector(CN26) on the Main PCB ASSY(44). 3. Remove 2 screws(S8) and then remove the Tuner Module(34). VIDEO P
17、CB(43) REMOVAL 1. Remove the Top-cabinet, referring to the previous step. 2. Disconnect the connector (CN91) on the Main PCB ASSY(44) from lead wire(BN91-9P) on the Video PCB(43). 3. Remove 4 screws(S8,S13) and then remove the Video PCB(43). DOWNLOAD PCB(42) REMOVAL 1. Remove the Top-cabinet, referr
18、ing to the previous step. 2. Disconnect the connector (CN89) from lead wire(BN89-7P) on the Front PCB(37). 3. Remove 2 screws(S4) and then remove the Download PCB(42). POWER TRANS(30) REMOVAL 1. Remove the Top-cabinet, referring to the previous step. 2. Disconnect the connector (CN62,CN63,CN64) on t
19、he Trans PCB from lead wire(BN62-2P,BN63-3P,BN64-6P) on the Main PCB(44). 3. Remove 4 Trans screws(S9) and then remove the Power Trans(30). MAIN PCB ASSY(44) REMOVAL 1. Remove the Top-cabinet, referring to the previous step. 2. Remove the Power Trans(30), referring to the previous step. 3. Disconnec
20、t the connector(CN81-20P wire assy) from connector(CN81-7P) on the Front PCB(37). 4. Disconnect the connector(CN82) from lead wire(BN82-7P) on the Front PCB(37). 5. Disconnect the connector(CN71) from lead wire(BN71-12P) on the Tone PCB(38). 6. Disconnect the connector(CN72) from lead wire(BN72-5P)
21、on the Tone PCB(38). 7. Disconnect the connector(CN73) from lead wire(BN73-3P) on the Phone PCB(40). 8. Disconnect the connector(CN91) from lead wire(BN91-9P) on the Video PCB(43). 9. Disconnect the connector(CN26-Card cable) from lead wire(CON1) on the Tuner Module(34). 10. Disconnect the connector
22、(CN61) from Power cord(35). 11. Remove 21 screws(S8-11EA, S13-1EA, S4-2EA, S6-2EA, S15-1EA, S12-3EA, S5-1EA) and then remove the Main PCB ASSY(44). HK3380/230 HK3480/230 HK3380/230 EXPLODED VIEW HK3480/230 EXPLODED VIEW HK3380/230 HK3480/230 FRONT PCB CUP11653Y (VIDEO PCB CUP11653-7) HK3380/230 REF
23、NO.PART NO.1st DESCRIPTION2nd DESCRIPTION CAPACITOR C603,604,605,606HCQI1H473JZTCAP , MYLAR0.047UF 50V J C701,702,711714 C802,817 C703,704,726HCBS1H101KBTCAP , CERAMIC100PF 50V K C707, 708CCEA1CKS470TCAP , ELECT47UF/16V C709,710,813,814HCBS1H470JTCAP , CERAMIC47PF 50V J C715,716,719,720KCFE1J183JBTC
24、AP , FILM0.018UF 63V J C717,718KCFE1J823JBTCAP , FILM0.082UF 63V J C721,722KCFE1J332JBTCAP , FILM0.0033UF 63V J C723,724HCBS1H221KBTCAP , CERAMIC220PF 50V K C727,744,808,809 C819,838,839,914 C728,729,730,804 C811,815,816,818 C830,834,837,911 C912,828 C741,742HCQI1H122JZTCAP , MYLAR1200PF 50V J C745H
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- HarmanKardon-HK3380-rec-sm2 电路图 维修手册 HarmanKardon HK3380 rec sm2 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


