Panasonic-SAHT17E-avr-sm 电路图 维修手册.pdf

《Panasonic-SAHT17E-avr-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Panasonic-SAHT17E-avr-sm 电路图 维修手册.pdf（66页珍藏版）》请在收音机爱好者资料库上搜索。

1、nAMPLIFIER SECTION RMS output power of each channel driven (at 240 V for areas other than continental Europe) 10 % total harmonic distortion 1 kHz front CH 170 W per channel (6 ) 1 kHz surround CH 70 W per channel (4 ) 1 kHz center CH 260 W per channel (4 ) 100 Hz subwoofer CH 260 W per channel (4 )

2、 Total RMS output power1000 W DIN power output: Dolby Digital Mode (at 240 V for areas other than continental Europe) T.H.D. 1% 1 kHz front CH 100 W per channel (6 ) 1 kHz surround CH 45 W per channel (4 ) 1 kHz center CH 150 W per channel (4 ) 100 Hz subwoofer CH 160 W per channel (4 ) Total DIN ou

3、tput power 600 W DIN power output: Stereo Mode (at 240 V for areas other than continental Europe) T.H.D. 1% 1 kHz front CH 2005 Matsushita Electric Industrial Co. Ltd. All rightsreserved.Unauthorizedcopyingand distribution is a violation of law. SA-HT17EP SA-HT17EG SA-HT17EB Color (S).Silver Type 90

4、 W per channel (6 ) 100 Hz subwoofer CH 160 W per channel (4 ) Total DIN output power 340 W Total harmonic distortion Half power at 1 kHz (Front CH)0.1% (6 ) Input sensitivity DVD, DVR/VCR, TV, GAME/AUX400 mV, IHF66 S/N at rated power (6 ) DVD, DVR/VCR, TV, GAME/AUX75 dB (85 dB, IHF66) Input impedan

5、ce DVD, DVR/VCR, TV, GAME/AUX47 k Tone controls BASS50 Hz, +10 to -10 dB TREBLE20 kHz, +10 to -10 dB Digital input OPTICAL2 COAXIAL1 nVIDEO SECTION Output voltage at 1 V input (unbalanced)10.1 Vp-p Maximum input voltage1.5 Vp-p Input/output impedance75 nFM TUNER SECTION Frequency range87.50-108.00 M

6、Hz Sensitivity S/N 30 dB1.5 V/ 75 S/N 26 dB1.3 V/ 75 S/N 20 dB1.2 V/ 75 IHF usable sensitivity(IHF58) 1.5 V/ 75 AV Control Receiver Specification ORDER NO. MD0504177C2 RadioFans.CN 收音机爱 好者资料库 IHF 46 dB stereo quieting sensitivity22 V/ 75 Total harmonic distortion MONO0.2% STEREO0.3% S/N MONO60 dB (7

7、1 dB, IHF) STEREO58 dB (65 dB, IHF) Frequency response 20 Hz-15 kHz, +1 dB, -2 dB Image rejection at 98 MHz40 dB IF rejection at 98 MHz70 dB Stereo separation 1 kHz40 dB Antenna terminal75 (unbalanced) nAM TUNER SECTION Frequency range 522-1611 kHz (9 kHz steps) 530-1620 kHz (10 kHz steps) Sensitivi

8、ty450 V/m Selectivity (at 999 kHz)35 dB nGENERAL Power supply (For United Kingdom)AC 230-240 V, 50 Hz Power supply (For Continental Europe)AC 230 V, 50 Hz Power consumption (Main unit)25 W (Subwoofer)390 W Dimensions (W H D) (Main unit)430 63 260 mm Mass (Main unit)1.85 kg Power consumption in stand

9、by mode:1 W 1 Caution for AC Mains Lead 4 2 Use of Active Subwoofer 5 2.1. Checking Player when Active Subwoofer is Used 5 2.2. Checking Main Unit Using Power Jig 5 3 Before Repair and Adjustment (Using Active Subwoofer Unit) 6 4 Safety Precautions 6 4.1. GENERAL GUIDELINES 6 5 Handling the Lead Sol

10、der 7 5.1. About lead free solder (PbF) 7 6 About the Protection Circuitry 7 7 Accessories 8 8 Operation Procedures 9 9 Remote Control 10 10 Assembling and disassembling 11 10.1. Disassembly flow chart 11 nSYSTEM System: SC-HT17 (EP) Main unit: SA-HT17 (EP) Satellite Speaker: SB-HT17 (P) Active Subw

11、oofer: SB-WA17 (E) System: SC-HT17 (EG) Main unit: SA-HT17 (EG) Satellite Speaker: SB-HT17 (P) Active Subwoofer: SB-WA17 (E) System: SC-HT17 (EB) Main unit: SA-HT17 (EB) Satellite Speaker: SB-HT17 (P) Active Subwoofer: SB-WA17 (EB) Speaker: SB-HT17 (P) Front speakers: SB-FS930 (P-S1) x 2 Surround sp

12、eakers: SB-FS880 (EG-S1) x 2 Center speaker: SB-PC930 (P-S1) x 1 Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. For main unit Marking sign is located on bottom of the unit.

13、 * Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. * Manufactured under license from Digital Theater System. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater System. 10.2. P.C.B. Positions 12 10.

14、3. Disassembly of Top Cabinet 13 10.4. Disassembly of Rear Panel 13 10.5. Disassembly of Front Panel 13 10.6. Disassembly of Panel P.C.B. 14 10.7. Disassembly of Function P.C.B. Typically the melting point is 50 - 70F (30 - 40C) higher. Please use a high temperature soldering iron. In case of the so

15、ldering iron with temperature control, please set it to 700 20F (370 10C). Pb free solder will tend to splash when heated too high (about 1100F/600C). When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the soldering points with t

16、he Pb free solder until it melts enough. 6 About the Protection Circuitry The protection circuitry may have operated if either of the following conditions is noticed: *No sound is heard when the power is supplied. *Sound stops during a performance. The functions of this circuitry is to prevent circu

17、itry damage, for example, the positive and negative speaker connection wires are “shorted”, or if speaker systems with an impedance less than the indicated rated impedance of this unit are used. If this occurs, follow the procedure outlined below: 1. Press the STANDBY/ON button, switch to STANDBY mo

18、de. 2. Determine the cause of the problem and correct it. 3. Press the STANDBY/ON button once again, supply the power. Note: When the protection circuitry functions, the unit will not operate unless the STANDBY/ON button is first switched STANDBY and then ON again. 7 SA-HT17EP / SA-HT17EG / SA-HT17E

19、B 7 Accessories AC cord (For EB only) AC cord (For EG * is checksum. If no ROM correction, display NO_EPROM. SUBWOOFERVCR (Analog)-18dB/0dB MUTINGDVD 6 CH-18dB/0dB INPUT MODEGAME/ AUXSTEREOAnalog-18dB/0dB SLEEPTVSTEREOAnalog-18dB/0dB TONE/BALDVDSTEREOAnalog-18dB/0dB LEVELDVR/VCRSTEREOAnalog-18dB/0dB

20、 EFFECTDVDSTEREODigital (COAX)-48dB/0dB STEREOTVSTEREODigital (OPT 1)-48dB/0dB PL2DVR/VCRSTEREODigital (OPT 2)-48dB/0dB TESTNo changeSURROUNDScan the test noise output channel with 500ms intervals. -18dB/0dB -/LGAME/ AUXSTEREOBalance is set to leftmost.-18dB/0dB +/RGAME/ AUXSTEREOBalance is set to r

21、ightmost.-18dB/0dB DIMMERIf the input selector is TUNER in E2 mode, Display mode (PS/PTY) is changed. * By the model setting, when there is not a function, ignore it. (ex. INPUT MODE in HT15 mode) * Auto decode mode cannot activate in Doctor Mode. *1) Memorize this frequency once in CH1 to 7 and rec

22、all it. 4. After enter the remote control code “DIRECT (TUNING)”, the message “OK” will appear for 0.2s second when each button is press one by one. 5. Press “POWER” button on main unit or remote control to exit this mode. 12.4. Activating Self Diagnosis Function (Service Mode) This mode is used for

23、 purpose of servicing. 1. With the following operation, the processing of this mode begins. Press and hold down the “HARMONIC BASS” button and the “TUNING DOWN” button, and then press the “POWER” button at the same time. * At this time, initialize all setting and set the following frequency to Tuner

24、. FL display will display “SERVICE” for 3 seconds. 2. To confirm the uP software Version: Press “TUNING DOWN” button on main unit, “MS085 *” is displayed. 19 SA-HT17EP / SA-HT17EG / SA-HT17EB 3. When TUNE UP is pressed, display “SUM *”, “*” is the check sum of ROM for ROM correction. If there is no

25、EEPROM IC, “NO EPROM” is displayed. 4. Press “POWER” button on main unit or remote control to exit this mode. 12.5. The Shutdown And Short Circuit Protection Detection It detects S_DET and DC_DET input port for malfunction. 1. S_DET Function (SHORT DETECTION) It is to detect a short in the Power Sup

26、ply. The detection of S_DET starts after 700ms after POWER ON. After that, it is always detected for any malfunction. Upon detection, the FLD display “F76” and the system is POWER OFF by setting POWER_RELAY port to OFF. 2. DC_DET Function DC_DET (pin 94) on micon is used to detect FAN LOCK. During P

27、OWER ON, it will be ignored until ALL_MUTE is released. Upon detection, FLD display “FAN LOCK” and MUTE_ALL will be set to ON. If any button is pressed, it is made to scroll error message “SWITCH OFF POWER”. After Power Off and On,this condition is reset, and DC_DET will resume detection of error. I

28、t also sets MUTE_SW to ON, to switch OFF the power amplifier. 3. FREQUENCY LIMITER Due to surround speaker change from 6.5 cm to 8 cm. We have to limited certain output level to certain FOR FRONT L/R channel and SURROUND L/R cut off frequency in order to avoid speaker noise. 4 ports are used for thi

29、s purpose. 2 ports are used for front L/R channel, 2 ports for surround L/R channel. Front Left/ Right Freq limiter (Port Name: FRONT_fc1pin49, FRONT_fc2pin50) Surround Left/ Right Freq limiter (Port Name: SURR_fc1pin47, SURR_fc2pin48) For FRONT L/R For SURROUND L/R 20 SA-HT17EP / SA-HT17EG / SA-HT1

30、7EB 12.6. Returning to Normal Display Press the POWER button on the unit to exit the function. The power is turned off. 21 SA-HT17EP / SA-HT17EG / SA-HT17EB 13 Block Diagram JK404 TV MONITOR TV JK351 DVD/VCR JK351 Q351 REGULATOR B Q352 REGULATOR B CB CR Y JK321 TV MON OUT CB CR Y JK321 DVR IN CB CR

31、Y JK321 TV IN JK404 DVD/VCR1 OUT C1AB00001930 COMPONENT VIDEO SELECTOR IC IC321 GY CG GY CG GY CG GY CG C1AB00001931 VIDEO SELECTOR IC351 D352 D351 VIDEO_B VIDEO_A VIDEO_C 8 -V 7 IN3 6 S4 2 S5 5 IN4 4 S3 3 IN5 D301D302 JK302 TV MONITOR OUT JK301 VCR1 IN C1AB00000166 VIDEO SELECTOR SWITCH IC IC302 C1

32、AB00000166 VIDEO SELECTOR SWITCH IC IC301 13 C3 C3 13 C4 11 11 C4 2 C1C1 2 C2 4 O2 5 4 C2 5 O2 +V 16 10 O1 O1 10 IN112 IN112 JK302 TV IN IN3 1 1 IN3 JK301 DVD IN IN23 IN23 GND 12 O3 11 IN2 9 S2 1013 IN1 14 S1 15 O1 1 O1 CH OUT 20,22,24 CH IN1 1,8,17 CH IN3 5,12,13 SW2 4 SW1 2 PSAVE 23 GAME/ AUX DVD

33、22 SA-HT17EP / SA-HT17EG / SA-HT17EB TUNER PACK TUNER_SD TUNER_ST TUNER_CLK TUNER_DT LOUT(R) C1BB00000919 VOLUME SELECTOR IC SLOUT(R) COUT SWOUT VOL_LATCH VOL_DAT VOL_CLK CON9016 TV GAME/AUX IN JK401 L_OUT2(R) C_OUT2 SW_OUT2 DVD IN DVR/VCR OUT JK402 IC409 DVR/VCR IN 1 7 IC408 C0ABBB000297 OP-AMP 3 2

34、 5 6 1 7 IC407 C0ABBB000297 OP-AMP 3 2 5 6 1 7 IC406 C0ABBB000297 OP-AMP 3 2 5 6 HAR_IN FILTER HAR_IN Q701 MUTING SWITCH FILTER HAR_IN Q703 MUTING SWITCH B HAR_MUTE Q702 MUTING SWITCH Q704 MUTING SWITCH B HAR_LEVEL SL(R) C CH SW CH JK404 SL(R) CH JK403 TUNER_DET TU_L(R) 4(5) TV_L(R) 72(73) CD_L(R) 7

35、6(77) DVD_L(R) 80(1) DVD/VCR_L(R) 68(69) RECL1(R) 58(59) 20(21) L_IN2(R) 23(22) SL_IN2(R) 24 C_IN2 25 SW_IN 29 LATCH 28 DATA 27 CLOCK 55 L_VIN 56 L_SELOUT 46 R_VIN 45 R_SELOUT 54(47) L_OUT(R) 36 C_OUT 35 SW_OUT 15(18) BALANCE L/-(R) 14(17) BALANCE L/+(R) SW_VM 34 SW_SELOUT 33 41(42) SL_OUT(R) DVD_C

36、7 DVD_SW 8 DVD_SL(R) 10(9) 23 SA-HT17EP / SA-HT17EG / SA-HT17EB C0FBZK000009 CODEC IC IC1101 24-bit DSP PROCESSING RAM PROGRAM MEMORY STC RAM INPUT BUFFER PLL CLOCK MANAGER INT49 CDOUT49 SCLK SCLK LRCLK LRCLK CCLK49 CDOUT42 CDIN49 INT42 RST42 CS42 Q1001 DSP_OFF JK1303 COAXIAL IN DVD DIGITAL IN DIGIT

37、AL AUDIO INPUT INTERFACE FRAMER SHIFTER INPUT BUFFER CONTROLLER OUTPUT FORMATTER PARALLEL OR SERIAL HOST INTERFACE COMPRESSED DATA INPUT INTERFACE SPDIF RECEIVER MCLK C0JBAB000633 LOGIC INVERTER IC1003 C0JBAZ002161 LOGIC IC1005 C0JBAZ002160 LOGIC IC1004 C2HBZZ000015 AC3/DTS IC1001 AU2 AU1 AU0 SWITCH

38、 IC1201 C0ABBB000297 OP-AMP IC1701 C0CBAAG00004 REGULATOR CS49 LOUT(R) SLOUT(R) COUT SWOUT SDOUT AU0 AU1 AU2 SDOUT MCLK LRCLK X1001 SCLK 3(5) 1(7) 2(6) IC1202 C0ABBB000297 OP-AMP 3(5) 1(7) 2(6) 1 7 IC1203 C0ABBB000297 OP-AMP 3 2 5 6 B JK1302 DIGITAL IN DVR (OPTICAL 2) JK1301 DIGITAL IN TV (OPTICAL 1

39、) B Q1702 SWITCH Q1701 REGULATOR B Q1703 SWITCH B B RST49 B BB ROM PROGRAM MEMORY RAM DATA MEMORY RAM DATA MEMORY RAM OUTPUT BUFFER 36(35) AOUTA(B)1+ 37(34) AOUTA(B)1- 32(31) AOUTA(B)2+ 33(30) AOUTA(B)2- 29 AOUTA3- 28 AOUTA3+ 27 AOUTB3+ 26 AOUTB3- AINL+(R) 15(14) AINL-(R) 16(13) OMCK 59 7 5 1,2,36 8

40、 RX0 49 RXP3 46 RXP7 42 CS 10 RST 12 CDOUT 8 INT 11 24 VA 4,6,51 VD 1 3 CX_SCLK 2 SAI_SCCLK 61 CX_LRCLK 3 SAI_LRCLK 60 CCLK 7 CDIN 9 5 2A 2 1A CX_SDIN1 1 CX_SDIN2 64 CX_SDIN3 63 SAI_SDOUT 54 RMCK 55 12 4A 9 3A 3Y 8 36 RESET 4 EMWR 4Y 11 18 CS 2Y 6 7 SCCLK 1Y 3 6 SCDIN 811,1417 DATA07 19 SCDOUT 9 20

41、INTREQ 12 11 8 44MCLK 43SCLK 42LRCLK 41AUDATA0 40AUDATA1 39AUDATA2 FILT1 33 AGND 35 VA 34 FILT2 32 CLKSEL31 CLKIN30 SDATAN1 22 LRCLKN126 CMPREQ29 CMPOAT27 SCLKN125 CMPCLK28 24 SA-HT17EP / SA-HT17EG / SA-HT17EB C_OUT2 C2CBHG000166 MICROPROCESSOR IC900 CF901 TUNER_SD TUNER_CLK TUNER_DT VOL_LATCH VOL_D

42、AT VOL_CLK IC401 C0ABBB000297 OP AMP L_OUT2(R) Q423 IC903 C3EBEC000044 EEPROM IC (NOT SUPPLIED) MUTING SWITCH 6(2) 7(1) 5(3) CS42 Q424 MUTING SWITCH Q409 (Q408) MUTING SWITCH 1 7 IC402 C0ABBB000297 OP-AMP 3 2 5 6 SW_OUT2 Q410 REGULATOR IC403 C0ABBB000297 OP AMP 6(2) 7(1) 5(3) RST42 INT42 CDOUT42 TUN

43、ER_ST IC404 C0ABBB000297 OP AMP 6(2) 7(1) 5(3) RST49 CS49 CCLK49 CDOUT49 CDIN49 DSP_OFF INT49 HAR_MUTE HAR_LEVEL SL(R) Q411 (Q412) MUTING SWITCH C1BB00000987 RDS IC220 7 VOL_LT 6 VOL_DT 5 VOL_CLK 27 MUTE_HP 21 MUTE_ALL 76 CS42516_CS 78 CS42516_RESET 75 CS42516_INT 77 CS42516_CDOUT 65 29 TUNCLK 30 TU

44、NDT 24 TUNER_ST XOUT 13 XIN 15 35 CS49300_RESET 34 CS49300_CS 33 CS49300_CCLK 32 CS49300_CDOUT 31 CS49300_CDIN 25 TUNER_SD 26 DSP_OFF 74 CS49300_INTREQ 39 HAR_MUTE 40 HAR_LEVEL X220 TUNER_DET MPXIN 2 8 XOUT 9 XIN RDDA 14 RDCL 15 37 RDS_CLK 36 RDS_DT 25 SA-HT17EP / SA-HT17EG / SA-HT17EB JK405 ACTIVE

45、SUBWOOFER HP100 HEADPHONE D101 C2CBHG000166 MICROPROCESSOR IC900 RCH Q401 MUTING SWITCH Q402 MUTING SWITCH Q405 (Q406) MUTING SWITCH Q404 (Q407) MUTING SWITCH Q420 MUTING SWITCH B Q421 MUTING SWITCH Q422 MUTING SWITCH B B TO FL DISPLAY Q101 LED DRIVE B Q901 RESET SWITCH B Z100 REMOTE SENSORVR100 JOG

46、 VOL 1 7 IC902 C0ABBB000297 OP-AMP 3 2 5 6 CON9016 1 7 IC901 C0ABBB000297 OP-AMP 3 2 5 6 Q100 LED DRIVE B Q104 LED DRIVE B Q105 LED DRIVE B Q106 LED DRIVE B Q107 LED DRIVE B 55 HP_SW SUBWOOFER 17 CENTER 15 FRONTL(R) 7(11) SURR_L(R) 12(14) 22 MUTE_S/C 3 DVDAC1 23 SUBAC2 1 DVDAC2 25 SUBAC1 22 FL1 24 F

47、L2 19 PCONT 51 PWR RELAY 21 SYNC 20 AC_SYNC 5 MUTE_H 28 SWPOWER 2 DCDET 94 DC_DET 12 RESET REMOTE 19 ENCA 53 ENCB 54 84 SPEC2_1KHZ 85 SPEC3_10KHZ 83 SPEC1_100HZ VOL_LED 56 HARMONIC_LED 61 D0 60 PLII 59 DTS 58 26 SA-HT17EP / SA-HT17EG / SA-HT17EB D753D756 FP752 FP751 D750 D762 B D763 D758 D752 C2CBHG

48、000166 MICROPROCESSOR IC900 SIGNAL LINES ( ) Indicates the Pin No. of Right Channel. : MAIN SIGNAL LINE: FM /AM SIGNAL LINE : AUXILLARY SIGNAL LINE : VIDEO SIGNAL LINE NOTE : Signal Lines are applicable to the Left Channel only. S101S105 KEY SW S100 POWER SW FROM ACTIVE SUBWOOFER 13, 59642651 SEG0 D

49、IG01 Q103 FL DRIVE Q102 FL DRIVE Q752 REGULATOR B Q755 REGULATOR B Q751 DETECT SWITCH B Q756 REGULATOR Q759 CURRENT LIMITING SWITCH Q758 REGULATOR Q757 CURRENT STABILIZER SWITCH Q753 REGULATOR B Q754 REGULATOR B E751 KEY1,2 81, 82 POWER_SAVE 80 C0HBB0000039 FL DRIVER IC100 RESET 5 SCK 7 CS 6 SDATA 8 SEG1 2449 SEG26 DIG1 412 DIG9 DIG09 SEG25 FL100 FL DISPLAY 67 FL RESET 68 FL CS 69 FLCLK 70 FLDT XOUT 12 XIN 13 4 DIG00DIG10 13 95 S_DET 27 SA-HT17EP / SA-HT17EG / SA-HT17EB (All