Panasonic-SAPT660P-htss-sm 电路图 维修手册.pdf

《Panasonic-SAPT660P-htss-sm 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Panasonic-SAPT660P-htss-sm 电路图 维修手册.pdf（158页珍藏版）》请在收音机爱好者资料库上搜索。

1、Main unit SA-PT660P/PC ? ?GENERAL Power supply:AC 120 V, 60 Hz Power consumption:This unit 135 W Power consumption in standby mode: approx. 0.3 W Dimensions (WHD):430 mm63 mm327 mm(16- 15/16” X 2-15/32” X 12-7/8”) Mass:This unit 3.7 kg (8.2lbs) Operating temperature range:+0 C to +40 C (+32 F to +10

2、4 F) Operating humidity range:35 % to 80 % RH (no condensation) ? ?AMPLIFIER SECTION RMS Output Power: Dolby Digital Mode Front Ch: 125 W per channel (3 ), 1 kHz, 10% THD Surround Ch: 125 W per channel (3 ), 1 kHz, 10% THD 2008 Matsushita Electric Industrial Co. Ltd. All rightsreserved.Unauthorizedc

3、opyingand distribution is a violation of law. SA-PT660P SA-PT660PC Colour (K).Black Type Center Ch: 250 W per channel (6 ), 1 kHz, 10% THD Subwoofer Ch: 250 W per channel (6 ), 100 Hz, 10 % THD Total RMS Dolby Digital mode power: 1000 W FTC Output Power: Dolby Digital Mode Front Ch: 63 W per channel

4、 (3 ), 120Hz to 20 kHz, 1% THD Surround Ch: 34 W per channel (3 ), 120Hz to 20 kHz, 1% THD Center Ch: 113 W per channel (6 ), 120Hz to 20 kHz, 1% THD Subwoofer Ch: 121 W per channel (6 ), 45 Hz to120 Hz, 1 % THD Total FTC Dolby Digital mode power: 428 W ? ?FM TUNER, TERMINALS SECTION DVD Home Theate

5、r Sound System Notes: This models CD/DVD mechanism is CR14. Please refer to the original service manual (Order No. MD0801004CE) for this mechanism. Specifications ORDER NO. MD0802005CE A6 RadioFans.CN 收音机爱 好者资料库 Preset Memory:FM 30 stations AM 30 stations Frequency Modulation (FM) Frequency range: 8

6、7.90-107.90 MHz (200-kHz step) 87.50-108.00 MHz (100-kHz step) Antenna terminals:75 (unbalanced) Amplitude Modulation (AM) 520kHz to 1710kHz (10-kHz step) Digital audio input Optical digital input:Optical terminal Sampling frequency:32 kHz, 44.1 kHz, 48 kHz Phone jack Terminal:Stereo, 3.5 mm (1/8”)

7、jack ? ?DISC SECTION Discs played 8 cm (3”) or 12 cm (5”): (1) DVD (DVD-Video) (2) DVD-RAM (DVD-VR, MP3*2, 5, JPEG*4, 5) (3) DVD-R (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5) (4) DVD-R DL (DVD-Video, DVD-VR) (5) DVD-RW (DVD-Video, DVD-VR, MP3*2, 5, JPEG*4, 5) (6) +R/+RW (Video) (7) +R DL (Video) (8) CD

8、, CD-R/RW CD-DA, Video CD, SVCD*1, MP3*2, 5, WMA*3, 5, JPEG*4, 5 *1 Conforming to IEC62107 *2 MPEG-1 Layer 3, MPEG-2 Layer 3 *3 Windows Media Audio Ver.9.0 L3 ?Not compatible with Multiple Bit Rate (MBR) *4 Exif Ver 2.1 JPEG Baseline files ?Picture resolution: between 160 x 120 and 6144 x 4096 pixel

9、s (Sub sampling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4). Extremely long and narrow pictures may not be displayed. *5 The total combined maximum number of recognizable audio and picture contents and groups: 4000 audio and picture contents and 400 groups. Pick up Wavelength (DVD/CD):655/785 nm Laser power (D

10、VD/CD):CLASS 1/CLASS 1M (Canada) CLASS II/CLASS I (U.S.A) Audio output (Disc) Number of channels:5.1 ch (FL, FR, C, SL, SR, SW) ? ?VIDEO SECTION Video system:NTSC Composite video output Output level:1 Vp-p (75 ) Terminal:Pin jack (1 system) Component Video Output ? ?Y output level:1 Vp-p (75 ) ? ?PB

11、output level:0.7 Vp-p (75 ) ? ?PRoutput level:0.7 Vp-p (75 ) ? ?Terminal:Pin jack (Y: green, PB: blue, PR: red) (1 system) HDMI AV output Terminal:19pin type A connector HDAVI Control: This unit supports “HDAVI Control 3” function. Note: 1.Specifications are subject to change without notice. Mass an

12、d dimensions are approximate. 2.Total harmonic distortion is measured by the digital spectrum analyzer. Solder: This model uses lead free solder (PbF). Mechanism: This model uses CR14 mechanism. Wireless Features (optional): This model supports multi-room wireless sound system (eg.SH-FX85). Refer to

13、 their respective original service manuals for *1. 2 SA-PT660P / SA-PT660PC RadioFans.CN 收音机爱 好者资料库 1 Safety Precautions 5 1.1. GENERAL GUIDELINES 5 1.2. Before Repair and Adjustment 5 1.3. Protection Circuitry 6 1.4. Safety Parts Information 6 2 Prevention of Electrostatic Discharge (ESD) to Electr

14、ostatically Sensitive (ES) Devices 8 3 Precaution of Laser Diode 9 4 About Lead Free Solder (PbF) 10 4.1. Service caution based on legal restrictions 10 5 Handling Precautions for Traverse Unit 11 5.1. Cautions to Be Taken in Handling the Optical Pickup Unit 11 5.2. Grounding for electrostatic break

15、down prevention 11 6 Accessories 13 7 Operation Procedures 14 7.1. Remote Control Key Buttons Operations 14 7.2. Main Unit Key Buttons Operations 15 7.3. Using the VIERA Link “HDAVI Control” 16 7.4. Using the iPod 18 7.5. Audio and Video Connection 20 7.6. Disc Information 22 8 Self-Diagnosis and Sp

16、ecial Mode Setting 24 8.1. Service Mode Summary Table 24 8.2. Service Mode Table (For DVD) 24 8.3. Service Mode Table (For CR14) 32 8.4. Wireless Service Mode Summary Table 34 8.5. Service Mode Table (Wireless) 35 8.6. DVD Self Diagnostic Function-Error Code 37 8.7. Sales Demonstration Lock Function

17、 41 8.8. Service Precautions 42 9 Assembling and Disassembling 44 9.1. Disassembly Flow Chart 46 9.2. Main Components and P.C.B. Locations 47 9.3. Disassembly of Top Cabinet 48 9.4. Disassembly of Rear Panel 48 9.5. Disassembly of DVD Mechanism Unit 48 9.6. Disassembly of Front Panel 49 9.7. Disasse

18、mbly of Panel P.C.B. 50 9.8. Disassembly of Power/Disc Button P.C.B. 50 9.9. Disassembly of DVD Lid 50 9.10. Disassembly of Ipod Cradle P.C.B. 51 9.11. Disassembly of AC Inlet P.C.B. 52 9.12. Disassembly of Main P.C.B. 53 9.13. Disassembly of D-Amp P.C.B. 54 9.14. Replacement of Digital Amp IC (IC50

19、00) 55 9.15. Replacement of Digital Amp IC (IC5200) 56 9.16. Replacement of Digital Amp IC (IC5300) 57 9.17. Replacement of Digital Amp IC (IC5400) 59 9.18. Disassembly of SMPS P.C.B. 60 9.19. Replacement of Switch Regulator IC (IC5701) 60 9.20. Replacement of Switch Regulator Diode (D5702) 61 9.21.

20、 Replacement of Regulator Diode (D5801) 63 9.22. Replacement of Regulator Diode (D5802) 63 9.23. Replacement of Regulator Diode (D5803) 64 9.24. Disassembly of Power Supply P.C.B. 65 9.25. Replacement of Regulator IC (IC2903) 66 9.26. Disassembly of DVD Module P.C.B. 67 9.27. Disassembly of Coproces

21、sor P.C.B. 68 9.28. Disassembly of Wireless Adapter P.C.B. 68 10 Assembling and Disassembling of DVD Mechanism Unit 70 10.1. Disassembling of TRV unit 70 10.2. Assembly of TRV unit 70 11 Service Fixture and Tools 72 12 Service Position 73 12.1. Checking MAIN SOURCE (follows the selected source for t

22、he main room)(FMAM)*IPODReturn to MAIN SOURCE *If the main room is in FM/AM mode, you can only select the same mode for the FM/AM tuner of the second room. For details, refer to the operating instructions for the optional Panasonic wireless sound system SH-FX85. -DVD Select disc as the source : DVD/

23、CD14 DVD/CDFMAMAUXD-IN or Set the Sleep timer Press and hold SLEEP. While the time is shown on the main units display, press the SLEEP repeatedly. OFF (Cancel) To confirm the remaining time, press and hold the button again. Select the play mode / Set the repeat mode Mute the sound MUTING flashes on

24、the main units display while the function is on. To cancel, press the button again or adjust the volume. Muting is canceled when you switch the unit to standby Adjust the subwoofer level or select speaker channel -SLEEP-REPEAT -FL DISPLAY-PLAY MODE VOL OK MUTINGSUBWOOFER -CHSELECT FUNCTIONS CANCELSO

25、UND TOP MENU MENU DIRECT NAVIGATOR START PLAY LIST -RETURN -SETUP SLOW/SEARCH PLAYPAUSESTOP SKIP -CD MODE 123 456 789 0 10 FM/AM/ EXT-IN TV/VIDEO VOL iPod TV -W.S. PL 1 14 15 16 17 18 20 21 22 24 19 2 4 5 6 7 8 9 11 10 12 23 25 13 3 LEVEL DISC ONE TOUCH PLAY -DVD -2ND SELECT SLEEP 30SLEEP 60SLEEP 90

26、SLEEP120 Avoiding interference with other Panasonic equipment Other Panasonic audio/video equipment may start functioning when you operate the unit using the supplied remote control. You can operate this unit in another mode by setting the remote control operating mode to REMOTE 2. The main unit and

27、 remote control must be set to the same mode. 1Press and hold on the main unit and 2 on the remote control until the main units display shows REMOTE 2. 2Press and hold OK and 2 on the remote control for at least 2 seconds. To change the mode back to REMOTE 1, repeat both steps above by replacing 2 w

28、ith 1. / 14 SA-PT660P / SA-PT660PC 7.2. Main Unit Key Buttons Operations 14 13 8 9 11 12 10 1 4 3 6 5 7 2 Standby/on switch POWER / Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 5 DISC SELECTOR Select a disc dire

29、ctly Disc exchange Open the disc tray to exchange the disc. Open/Close the disc tray Turn Subwoofer Boost on/off Select the source DVD/CDFMAMAUXD-INIPOD Skip or slow-search play / Select the radio stations Stop playing / Select the tuning mode / Adjust the FM reception condition Play discs / Memoriz

30、e the receiving radio stations Connect iPod Remote control signal sensor Display Adjust the volume of the main unit Connect headphones (not included) Headphone plug type: 3.5 mm (1/8z ) stereo mini plug Reduce the volume before connecting. Audio is automatically switched to 2-channel stereo. To prev

31、ent hearing damage, avoid listening for prolonged periods of time. VOLUME POWERPOWER SELECTORTUNE MEMORYTUNE MODEFM MODE SW BOOST OPEN CLOSE 5 DISC SELECTOR EXCHANGE12345 1314 143689 1112 SW BOOSTOPEN CLOSE 10 572 15 SA-PT660P / SA-PT660PC 7.3. Using the VIERA Link “HDAVI Control” VIERA Link HDAVI C

32、ontrol VIERA LinkTM is a new name for EZ SyncTM. VIERA Link HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) under HDAVI Control . You can use this function by connecting the equipment with the HDMI cable. See the operating instructions fo

33、r connected equipment for operational details. VIERA Link HDAVI Control , based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufactu

34、rers equipment that supports HDMI CEC cannot be guaranteed. This unit supports HDAVI Control 3 function. HDAVI Control 3 is the newest standard (current as of December, 2007) for Panasonics HDAVI Control compatible equipment. This standard is compatible with Panasonics conventional HDAVI equipment.

35、Please refer to individual manuals for other manufacturers equipment supporting VIERA Link function. The TV with HDAVI Control 2 (or later) function enables the following operation: VIERA Link Control only with TVs remote control for HDAVI Control 2 (or later) Preparation Confirm that the HDMI conne

36、ction has been made Set VIERA Link to ON To complete and activate the connection correctly, turn on all VIERA Link HDAVI Control compatible equipment and set the TV to the corresponding HDMI input mode for this unit. Setting the TV audio for VIERA Link HDAVI Control Select between AUX and D-IN to wo

37、rk with the linked operations. Confirm the audio connection to the AUX terminal (for AUX) or OPTICAL IN terminal (for D-IN ) 1Press ,SELECT to select AUX or D-IN . 2Press SETUP to select TV AUDIO , then press , to switch AUX or D-IN . Whenever the connection or settings are changed, reconfirm the po

38、ints above. Automatic setup The settings for TV ASPECT * 1and LANGUAGE* 2 automatically follow to the settings of the TV. (This may not work if the corresponding setting you have made for your TV is not available on this unit.) * * 1 When using VIERA Link HDAVI Control with HDAVI Control 3 compatibl

39、e TV * 2 When using VIERA Link HDAVI Control with HDAVI Control 2 (or later) compatible TV You can turn on this unit and the TV, and start playing the disc with a single press of a button. This function also works if you press PLAY on this units remote control when this unit is in standby mode. Play

40、back may not be immediately displayed on the TV. If you miss the beginning portion of playback, press or to go back to where playback started. When you switch the TV input to TV tuner mode, this unit will automatically switch to AUX * or D-IN*. (This does not work when this unit is in IPOD mode.) Wh

41、en you start disc play, the TV will automatically switch its input mode for this unit. When the TV is turned off, this unit goes into standby mode automatically. This function works only when DVD/CD , AUX * or D-IN* is selected as the source on this unit. When the TV is turned on, this unit does not

42、 turn on automatically. (Power on link is not available.) When you press , only this unit turns off. Other connected equipment compatible with VIERA Link HDAVI Control stays on. * “AUX” or “D-IN” (“DIGITAL IN”) works depending on the “TV AUDIO” setting (above, Setting the TV audio for VIERA Link “HD

43、AVI Control”). One touch play To start disc playback. This units speakers will be automatically activated Auto input switching Power off link ONE TOUCH PLAY will Note Note -SLEEP-REPEAT -FL DISPLAY-PLAY MODE VOL OK MUTINGSUBWOOFER -CHSELECT FUNCTIONS CANCELSOUND LEVEL TOP MENU MENU DIRECT NAVIGATOR

44、START PLAY LIST -RETURN -SETUP SLOW/SEARCH PLAYPAUSESTOP SKIP -CD MODE 123 456 789 0 10 ONE TOUCH PLAY FM/AM/ EX T -IN TV/VIDEO VOL iPod TV -DVD -2ND SELECT -W.S. PL DISC SLOW/SEARCH PLA Y ONE TOUCH PLA Y SETUP SKIP FM/AM/EXT-IN 16 SA-PT660P / SA-PT660PC You can select whether audio is output from t

45、his units speakers or the TV speakers by using the TV menu settings. For details, refer to the operating instructions of your TV. Home theater This units speakers are active. When this unit is in standby mode, changing the TV speakers to this units speakers in the TV menu will automatically turn thi

46、s unit on and select AUX * or D-IN* as the source. The TV speakers are automatically muted. You can control the volume setting using the volume or mute button on the TVs remote control. (The volume level is displayed on the main units FL display.) To cancel muting, you can also use this units remote

47、 control If you turn off this unit, TV speakers will be automatically activated. TV TV speakers are active. The volume of this unit is set to 0 . This function works only when DVD/CD , AUX * or D-IN is selected as the source on this unit. Audio output is 2-channel audio. When switching between this

48、unit speakers and TV speakers, the TV screen may be blank for several seconds. You can control the playback menus of this unit with the TVs remote control. When operating the TVs remote control, refer to the below illustration for operation buttons. 1Select this units operation menu by using the TV

49、menu settings. (For details, refer to the operating instructions of your TV.) The START menu will be shown. e.g. DVD-V The START menu can also be shown by using a button on the TVs remote control (e.g. SUB MENU). When DVD/CD is selected as the source, this works only during stop mode. This does not work while iPod music playback screen is displayed on the TV. 2Select the desired item on the START menu When the on-screen control panel appears e.g. DVD-V