Panasonic-SAVK960G-cs-sm 电路图 维修手册.pdf
《Panasonic-SAVK960G-cs-sm 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Panasonic-SAVK960G-cs-sm 电路图 维修手册.pdf(151页珍藏版)》请在收音机爱好者资料库上搜索。
1、? ? ? ? AMPLIFIER SECTION RMS Output Power: Dolby Digital Mode ?Front Ch (High Ch)110 W per channel (3 ), 1 kHz, 10% THD ?Front Ch (Low Ch)55 W per channel (6 ), 100 Hz, 10% THD ?Surround Ch110 W per channel (3 ), 1 kHz, 10% THD ?Center Ch110 W per channel (3 ), 1 kHz, 10% THD ?Subwoofer Ch110 W per
2、 channel (3 ), 100 Hz, 10% THD ?Total RMS Dolby Digital mode power 2007 Matsushita Electric Industrial Co. Ltd. All rightsreserved.Unauthorizedcopyingand distribution is a violation of law. SA-VK960GC SA-VK960GCS SA-VK960GCT SA-VK960GS Colour (K). Black Type 880 W PMPO output power10000 W ? ? ? ? FM
3、/AM TUNER, TERMINALS SECTION Preset stationFM 20 stations AM 15 stations Frequency Modulation (FM) ?Frequency range87.50 to 108.00 MHz (50 kHz step) ?Sensitivity4.0 V (IHF) ?S/N 26 dB2.2 V ?Antenna terminals75 (unbalanced) Amplitude Modulation (AM) DVD Stereo System Notes: This models DVD changer me
4、chanism unit is CRS1D. Please refer to the original Service Manual (Order No. MD0603065A3) for this mechanism. Specifications ORDER NO. MD0707009CE RadioFans.CN 收音机爱 好者资料库 ?Frequency range522 to 1629 kHz (9 kHz step) 520 to 1630 kHz (10 kHz step) AM Sensitivity S/N 20 dB at 999 kHz 1000 V/m Music Po
5、rt input jack ?Sensitivity100 mV, 4.7 k ?TerminalStereo, 3.5 mm jack Phone jack ?TerminalStereo, 3.5 mm jack Mic jack ?Sensitivity0.7 mV, 600 ?TerminalMono, 6.3 mm jack (2 system) AUX ?Sensitivity2 V, 8 k ?TerminalStereo, RCA jack USB Port ?USB standardUSB 2.0 full speed ?Media file format supportMP
6、3 (*.mp3) WMA (*.wma) JPEG (*.jpg, *.jpeg) MPEG4 (*.asf) ?USB device file systemFAT12, FAT16, FAT32 ?USB port power500 mA (Max) ? ? ? ? CASSETTE DECK SECTION ?Type1 way, Auto Reverse ?Track system4-Track, 2 Channel Heads ?Record/PlaybackSolid permalloy head ?ErasureDouble gap ferrite head MotorDC se
7、rvo motor Recording systemAC bias 100 kHz Erasing systemAC erase 100 kHz Tape speed4.8 cm/s Overall frequency response (+3, -6 dB) at DECK OUT ?Normal35 Hz to 14 kHz S/N ratio50 dB (A weighted) Wow and flutter0.18% (WRMS) Fast forward and rewind time Approx. 120 seconds with C-60 cassette tape ? ? ?
8、 ? VIDEO SECTION Video systemPAL625/50, PAL525/60, NTSC Composite video output ?Output level1 Vp-p (75 ) ?TerminalPin jack (1 system) Component video output NTSC: 480p/480i, PAL: 576p/576i ?Y output level1 Vp-p (75 ) ?PBoutput level0.7 Vp-p (75 ) ?PRoutput level0.7 Vp-p (75 ) ?Terminal Pin jack (Y:
9、green, PB: blue, PR: red) (1 system) ? ? ? ? DISC SECTION Disc played 8 cm or 12 cm (1) DVD (DVD-Video, DivX#6, #7) (2) DVD-RAM (DVD-VR, JPEG# 4, #7, MP3# 2, #7, MPEG4# 5, #7, DivX# 6, #7) (3) DVD-R (DVD-Video, DVD-VR, JPEG# 4, #7,MP3# 2, #7, MPEG4# 5, #7, DivX# 6, #7) (4) DVD-R DL (DVD-Video, DVD-V
10、R) (5) DVD-RW (DVD-Video, DVD-VR, JPEG# 4, #7, MP3# 2, #7, MPEG4# 5, #7, DivX# 6, #7) (6) +R/+RW (Video) (7) +R DL (Video) (8) CD,CD-R/RW CD-DA, Video CD, SVCD# 1, MP3# 2, #7, WMA# 3, #7, JPEG# 4, #7, MPEG4# 5, #7, DivX# 6, #7, HighMAT Level 2 (Audio and Image) # 1 Conforming to IEC62107 # 2 MPEG-1
11、Layer 3, MPEG-2 Layer 3 # 3 Windows Media Audio Ver. 9.0 L3 Not compatible with Multiple Bit Rate (MBR) # 4 Exif Ver 2.1 JPEG Baseline files Picture resolution: between 160 x 120 and 6144 x 4096 pixels (Sub sampling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4). Extremely long and narrow pictures may not be disp
12、layed. # 5 MPEG4 data recorded with the Panasonic SD multi cameras or DVD video recorders. Conforming to SD VIDEO specifications (ASF standard) / MPEG4 (Simple Profile) video system/ G.726 audio system. # 6 Plays all versions of DivXvideo (including DivX6) with standard playback of DivXmedia files.
13、Certified to the DivX Stereo System Profile. # 7 The total combined maximum number of recognizable audio, picture and video contents and groups: 4000 audio, picture and video contents and 400 groups. Pick up Wavelength ?CD785 nm ?DVD662 nm Laser power ?CDCLASS 1M ?DVDCLASS 1 Audio output (Disc) ?Num
14、ber of channels(FL, FR, C, SL, SR, SW) 5.1 ch Audio performance (measurement at: Rec out terminal) ?Frequency response (CD-Audio)4 Hz to 20 kHz ? ? ? ? GENERAL Power supply ?GC area:AC 220 to 240 V, 50/60 Hz ?GCS/GCT/GS areas:AC 110 to 127V/220 to 240 V, 50/60 Hz Power consumption360 W Power consump
15、tion in standby mode 0.9 W (approximate) Dimensions (W x H x D)250 x 330 x 334.6 mm Mass5.5 kg Operating temperature range+5C to +35C Operating humidity range5% to 90% RH (no condensation) 2 SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS RadioFans.CN 收音机爱 好者资料库 Notes: 1. Specifications are subj
16、ect to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. ? ? ? ? SYSTEM Refer to the respective original service manuals for *1, *2, *3, *4. This model uses CRS1D mechanism (DVD/CD changer mechanism). You can refer
17、to the original service manual for information on this mechanism. 3 SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS RadioFans.CN 收音机爱 好者资料库 1 Safety Precautions 6 1.1. General Guidelines 6 1.2. Safety Precaution for AC Power Supply Cord (For GS only) 7 1.3. Before Use (For GCS/GCT/GS only) 7 1.4
18、. Before Repair and Adjustment 7 1.5. Protection Circuitry 7 1.6. Safety Parts Information 8 2 Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices 9 3 Precaution of Laser Diode 10 4 About Lead Free Solder (PbF) 11 4.1. Service caution based on legal restrictions 1
19、1 5 Handling Precautions for Traverse Unit 12 5.1. Handling Optical Pickup in Traverse Unit 12 5.2. Replacing Precautions for Optical Pickup Unit 12 5.3. Grounding for Preventing Electrostatic Destruction 12 6 Accessories 14 7 Operation Procedures 15 7.1. Main Unit Key Buttons Operations 15 7.2. Rem
20、ote Control Key Buttons Operations 16 7.3. Portable Audio Equipment Connection QZZCWAT 12.1.1. Head Azimuth Adjustment (Deck 1/2) Caution: Please replace both azimuth adjustment screw and springs simultaneously when readjusting the head azimuth. (shown in Fig. 2) Even if you wish to readjust the hea
21、d azimuth without replacing the screws and springs, a fine adjustment to the azimuth screw and spring. Please remove the screw-locking bond left on the head base when replacing the azimuth screw. If you wish to readjust the head azimuth, be sure to adjust with adhering the cassette tape closely to t
22、he mechanism by pushing the center of cassette tape with your finger. (shown in Fig. 3) 1. Playback the azimuth adjustment portion (8 kHz, -20dB) of the test tape (QZZCFM) in the forward play mode. Vary the azimuth adjustment screw until the output of the R-CH (PB OUT-R) are maximized. 2. Perform th
23、e same adjustment in the reverse play mode. 3. After the adjustment, apply screwlock (NEJI-LOCK) to the azimuth adjusting screw. Screw-Lock applied on the screw must be more than 180 around screw. 12.1.2. Tape Speed Adjustment (Deck 1/2) 1. Set the tape edit button to “NORMAL” position. 2. Insert th
24、e test tape (QZZCWAT) to DECK 2 and playback (FWD side) the middle portion of it. 3. Adjust Motor VR (DECK 2) for the output value shown below. Adjustment target: 2910 3090 Hz (NORMAL speed) 4. After alignment, assure that the output frequency of the DECK 1 FWD are within 90 Hz of the value of the o
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Panasonic-SAVK960G-cs-sm 电路图 维修手册 Panasonic SAVK960G cs sm 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


