Harman-Kardon-BDP-1-Service-Manual 电路图 维修手册.pdf

《Harman-Kardon-BDP-1-Service-Manual 电路图 维修手册.pdf》由会员分享，可在线阅读，更多相关《Harman-Kardon-BDP-1-Service-Manual 电路图 维修手册.pdf（54页珍藏版）》请在收音机爱好者资料库上搜索。

1、 harman/kardon Service Manual BDP 1/120 BDP 10/230 Blu-ray players harman/kardonBDP 1 / BDP 10 Service Manual CONTENTS BDP 10 SPECIFICATIONS2 BDP 1 SPECIFICATIONS.3 BDP 10 SAFETY INFORMATION.4 BDP 1 SAFETY INFORMATION.6 FRONT PANEL CONTROLS.8 MESSAGE DISPLAY.10 BDP 10 REAR-PANEL CONNECTIONS11 BDP 1

2、REAR-PANEL CONNECTIONS.13 REMOTE CONTROL FUNCTIONS15 BDP 10 INSTALLATION.17 BDP1 INSTALLATION.19 SOFTWARE UPGRADE INSTRUCTIONS.21 PACKAGING22 EXPLODED VIEW.23 BDP 10 PARTS LIST.24 BDP 1 PARTS LIST.25 TROUBLE SHOOTING CHARTS26 PCB DRAWINGS32 BLOCK DIAGRAM.38 SCHEMATIC DIAGRAMS.39 TECH TIP HKTT2010-01

3、.54 harman/kardon, Inc. 8500 Balboa Blvd. Released 2010 Northridge, CA. 91329 Rev0 8/2010 Discontinued XXXX RadioFans.CN 收音机爱 好者资料库 BDP 10 TECHNICAL SPECIFICATIONS Analog Audio Output: ? Frequency Response: ?2Hz 22kHz +0/0.5dB (48kHz sampling) 2Hz 44kHz +0/1.5dB (96kHz sampling) 2Hz 88kHz +0/0.5dB (

4、192kHz sampling) CD:2Hz 20kHz +0/0.5dB Signal/Noise Ratio (SNR): -100dB ( 3dB), A-weighted Dynamic Range: DVD:100dB (18-bit)/105dB (20-bit) CD/DVD:96dB (16-bit) THD/1kHz:DVD/CD: 0.0025% Wow 6,226,616; 6,487,535; 7,212,872; 7,333,929 Dolby Digital Plus; Dolby Digital; ? ? ? 9 Still-Image format: JPEG

5、 Video Signal System: PAL or NTSC HDMI Output: Video: up to 1080p ? ? 7.1 channels) HDCP: version 1.1-compliant Composite Video Output: 1V p-p/75 ohms, sync negative polarity Component Video Output: Y: 1V p-p/75 ohms, sync negative polarity Pr: 0.7V p-p/75 ohms Pb: 0.7V p-p/75 ohms 2 harman/kardonBD

6、P 1 / BDP 10 Service Manual RadioFans.CN 收音机爱 好者资料库 32 Applicable Disc: Disc Formats: 5 (12cm) or 3(8cm) BD-Video, DVD- Video, standard-conforming DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-RAM, CD, CD-R, CD-RW or MP3 discs Region Code: BD-Video disc with Code A or Open Region DVD-Video disc with Code 1 or 0

7、 only DVD Layers: Single-side/single-layer, single-side/ dual-layer, dual-side/dual-layer Video Format: MPEG-2, MPEG-4 AVC (H.264), SMPTE VC1 (VC-9) Audio Formats: DolbyTrueHD; Dolby Digital Plus; Dolby Digital; DTS-HD Master Audio(pass- through only); LPCM; MPEG-1 and 2, layer 2; MP3; Windows Media

8、9 Still-Image format: JPEG Video Signal System:NTSC HDMIOutput:Video: up to 1080p HDMI: (V.1.3a with x.v.Color, Dolby TrueHD, DTS-HD Master Audio and PCM up to 7.1 channels) HDCP: version 1.1-compliant Composite Video Output:1V p-p/75 ohms, sync negative polarity Component Video Output: Y: 1V p-p/75

9、 ohms, sync negative polarity Pr: 0.7V p-p/75 ohms Pb: 0.7V p-p/75 ohms Analog Audio Output:2V RMS (1kHz, 0dB) Frequency Response: DVD (Linear PCM): 2Hz 22kHz +0/0.5dB (48kHz sampling) 2Hz 44kHz +0/1.5dB (96kHz sampling) 2Hz 88kHz +0/0.5dB (192kHz sampling) CD: 2Hz 20kHz +0/0.5dB Signal/Noise Ratio

10、(SNR):100dB (3dB), A-weighted Dynamic Range: DVD: 100dB (18-bit)/105dB (20-bit) CD/DVD: 96dB (16-bit) THD/1kHz:DVD/CD: 0.0025% Wow 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929 never pull the cord. If you do not intend to use the unit for any considerable length of time

11、, disconnect the plug from the AC outlet. Do Not Open the Cabinet There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or sta

12、ple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service center. Installation Location ? ? the unit on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the

13、weight of the product. ? ? ? ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet. Under some circumstances, a fan may be required. The unit should be placed on its own shelf, not directly on top of

14、another component. ? ? ? ? ? ? to direct sunlight or heating equipment. ? ? ? ? ? them. ? ? ? ? ? componentsin your system, there is the remote possibility that the rubber padding on the bottom of the units feet may leave marks on certain wood or veneer materials. Use caution when placing the unit o

15、n soft woods or other materials that may be damaged by heat or heavy objects. Some surface finishes may be particularly sensitive to absorbing such marks, due to a variety of factors beyond Harman Kardons control, including the nature of the finish, cleaning materialsused, and normal heat and vibrat

16、ion caused by the use of the product, or otherfactors. We recommend that caution be exercised in choosing an installation location for the component and in normal maintenance practices, as your warranty will not cover this type of damage to furniture. Cleaning When the unit gets dirty, wipe it with

17、a clean, soft, dry cloth. If necessary, and only after unplugging the AC power cord, wipe it with a soft cloth dampened with mild soapy water, then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cl

18、eaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide near the unit. Moving the Unit Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the

19、 AC outlet. NOTE: To avoid damage to the BDP 10 that may not be covered by the warranty, remove the disc from the unit before it is moved. Once the BDP 10 is installed, a disc may be left in the unit when it is turned off, but the unit should NEVER be moved with a disc left in the disc tray. Importa

20、nt Information for the User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gener

21、ates, uses and can radiate radio-frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that harmful interference will not occur in a particular installation. If this equipment does ca

22、use harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ? ? ? ? ? ? ? ?different from that to which the receiver is connected. ? ? This

23、device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. NOTE: Changes or modifications ma

24、y cause this unit to fail to comply with Part 15 of the FCC Rules and may void the users authority to operate the equipment. CAUTION: The BDP 10 uses a laser system. To prevent direct exposure to the laser beam, do not open the cabinet enclosure or defeat any of the safety mechanisms ? ? Should the

25、unit require maintenance or repair, please contact your local Harman Kardon service center. Refer servicing to qualified personnel only. Unpacking The carton and shipping materials used to protect your new player during shipment were specially designed to cushion it from shock and vibration. We sugg

26、est that you save the carton and packing materials for use in shipping if you move, or should the unit ever need repair. To minimize the size of the carton in storage, you may wish to flatten it. This is done by carefully slitting the tape seams on the bottom and collapsing the carton. Other cardboa

27、rd inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag. If you do not wish to save the packaging materials, please note that the carton and other sections of the shipping protection are recyclable. Please respect

28、 the environment and discard those materials at a local recycling center. It is important that you remove the protective plastic film from the front-panel lens. Leaving the film in place will affect the performance of your remote control. for BDP10 for BDP10 5 harman/kardonBDP 1 / BDP 10 Service Man

29、ual Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers

30、instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A g

31、rounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched,

32、 particularly at plugs, convenience receptacles and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is u

33、sed, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a

34、ny way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Do not expose this apparatus to dripping or splashing and ensure that no ob

35、jects filled with liquids, such as vases, are placed on the apparatus. 16. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. 17. The mains plug of the power supply cord shall remain readily operable. 18. Do not expose batteries t

36、o excessive heat such as sunshine, fire or the like. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of e

37、lectric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: To reduce the risk of fire or electric shock, do not expos

38、e this apparatus to rain or moisture. 2 SAFETY INFORMATIONfor BDP1 6 harman/kardonBDP 1 / BDP 10 Service Manual 3 Important Safety Information Verify Line Voltage Before Use Your BDP 1 has been designed for use with 110240-volt AC current, and the plug is specifically designed for 120-volt applicati

39、ons. Connection to a line voltage other than that for which the plug is intended can create a safety and fire hazard and may damage the unit. If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your selling dealer before p

40、lugging the unit into a wall outlet. Do Not Use Extension Cords To avoid safety hazards, use only the power cord attached to your unit. We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy obje

41、cts on them. Damaged power cords should be replaced immediately by an authorized service center with a cord meeting factory specifications. Handle the AC Power Cord Gently When disconnecting the power cord from an AC outlet, always pull the plug; never pull the cord. If you do not intend to use the

42、unit for any considerable length of time, disconnect the plug from the AC outlet. Do Not Open the Cabinet There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal

43、object such as a paper clip, wire or staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service center. Installation Location To ensure proper operation and to avoid the potential for safety hazards, place the unit on a firm and l

44、evel surface. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product. Make certain that proper space is provided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area,

45、make certain that there is sufficient air movement within the cabinet. Under some circumstances, a fan may be required. The unit should be placed on its own shelf, not directly on top of another component. Do not place the unit directly on a carpeted surface. Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating equipment. Avoid moist or humid locations. Do not obstruct the ventilation slots on the unit, or place objects directly over them. Due to the heat generated by operation of the BDP1 and other component