Bose-Companion3S2-mss-sm 电路图 维修手册.pdf
《Bose-Companion3S2-mss-sm 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Bose-Companion3S2-mss-sm 电路图 维修手册.pdf(36页珍藏版)》请在收音机爱好者资料库上搜索。
1、Companion 3 Series II Multimedia Speaker System 2007 Bose CorporationService Manual Reference Number 297700-SM Rev. 05 Electronic copy only The Companion 3 series II multimedia speaker system is a stereo system designed to be used as a computer sound system. It can be used with any analog audio sour
2、ce. It has a bass module with a 6.5 inch dual voice coil woofer in a slot ported design. The two satellite speakers connect to the bass module and are mounted to speaker stands. The speakers can be placed on a desk or other surface when removed from the stands. A wired remote control pod is used to
3、control volume and mute/un-mute functions. The system also has a second input and a stereo headphone output on the control pod. Product Description RadioFans.CN 收音机爱 好者资料库 2 Warranty The Bose Companion 3 series II MultiMedia Speaker System is covered by a 1-year, transferable limited warranty. Cauti
4、on: The Companion 3 series II MultiMedia Speaker System contains no user serviceable parts. To prevent warranty infractions, refer servicing to warranty service centers or factory service. Proprietary Information THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF BOSE CORPORATION WHICH IS BEING FURNI
5、SHED ONLY FOR THE PURPOSE OF SERVICING THE IDENTIFIED BOSE PRODUCT BY AN AUTHORIZED BOSE SERVICE CENTER OR OWNER OF THE BOSE PRODUCT, AND SHALL NOT BE REPRODUCED OR USED FOR ANY OTHER PURPOSE. Contents Safety Information.3 Electrostatic Discharge Sensitive (ESDS) Device Handling.3 Specifications.4 P
6、art List Notes .5 Figure 1. Bass Module Assembly Exploded View.56 Bass Module Assembly Parts List .6 Figure 2. Amplifier Module Assembly Exploded View.7 Amplifier Module Assembly Parts list.7 Figure 3. Packing Exploded Veiw .8 Packing Parts List .8 Electrical Parts List . 9-19 Main PCB Assembly Part
7、s List. 9-17 Power Supply PCB Assembly Parts List . 18-19 Disassembly Procedures . 20-22 Test Procedures . 23-25 Theory of Operation . 26-28 Revision History .29 RadioFans.CN 收音机爱 好者资料库 3 Safety Information 1. Parts that have special safety characteristics are identified by the symbol on the schemat
8、ics or by special notes on the parts list. Use only replacement parts that have critical characteristics recommended by the manufacturer. 2. Make leakage current or resistance measurements to determine that exposed parts are acceptably insulated from the supply circuit before returning the unit to t
9、he customer. Use the following checks to perform these measurements: A. Leakage Current Hot Check- With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. (Do not use an isolation transformer during this test). Use a leakage current tester or a metering system tha
10、t complies with the American National Standards Institute (ANSI) C101.1 “Leakage Current for Appliances” and the Underwriters Laboratories (UL) 6500/IEC 60056 paragraph 9.1.1. With the unit AC switch first in the ON position and then in the OFF position, mea- sure from a known earth ground (metal wa
11、terpipe, conduit, etc.) to all exposed metal parts of the unit (antennas, handle bracket, metal cabinet, screwheads, metallic overlays, control shafts, etc.) espe- cially any exposed metal parts that offer an electrical return path to the chassis. Any current measured must not exceed 0.5 milliamp. R
12、everse the unit power cord plug in the AC outlet and repeat the test. ANY MEASUREMENTS NOT WITHIN THE LIMITS SPECIFIED HEREIN INDICATE A POTENTIAL SHOCK HAZARD THAT MUST BE ELIMINATED BEFORE RETURNING THE UNIT TO THE CUS- TOMER. B. Insulation Resistance Test Cold Check- (1) Unplug the power supply a
13、nd connect a jumper wire between the two prongs of the plug. (2) Turn on the power switch of the unit. (3) Measure the resis- tance with an ohmmeter between the jumpered AC plug and each exposed metallic cabinet part on the unit. When testing 3 wire products, the resistance measured to the product e
14、nclosure should be between 2 and infinite MOhms. Also, the resistance measured to exposed input/output connectors should be between 4 and infinite MOhms. When testing 2 wire products, the resistance measured to exposed input/output connectors should be between 4 and infinite MOhms. If it is not with
15、in the limits specified, there is the possibility of a shock hazard, and the unit must be repaired and rechecked before it is returned to the customer. Electrostatic Discharge Sensitive (ESDS) Device Handling This unit contains ESDS devices. We recommend the following precautions when repairing, rep
16、lacing or transporting ESDS devices: Perform work at an electrically grounded work station. Wear wrist straps that connect to the station or heel straps that connect to conductive floor mats. Avoid touching the leads or contacts of ESDS devices or PC boards even if properly grounded. Handle boards b
17、y the edges only. Transport or store ESDS devices in ESD protective bags, bins, or totes. Do not insert unprotected devices into materials such as plastic, polystyrene foam, clear plastic bags, bubble wrap or plastic trays. RadioFans.CN 收音机爱 好者资料库 4 Specifications Mechanical Dimensions: Bass Module:
18、 8 5/8 “ H x 7 1/8” W x 14” D (21.8 x 18 x 35.56 cm) Satellite Speaker: (no stand) 2 1/2” H x 2 3/4” W x 2 3/8” D (6.14 x 6.86 x 6.03 cm) Control Pod: 2 1/2 “ D x 1 1/8” H (6.35 x 2.79 cm) Weight: Bass Module: 14.65 lbs (6.64 kg) unpacked Satellite Speaker: .75 lbs (0.34 kg) each Packaged System: 20
19、.15 lbs (9.13 kg) packed Finish: Bass Module: Scratch-resistant, satin-finish vinyl Satellites: Painted polymer finish Bass Box: Slot ported Bass Box Port Tuning: 45 Hz Electrical Power Rating: USA/Canada: 115 VAC 50/60 Hz Japan: 100 VAC 50/60 Hz Euro: 230 VAC 50/60 Hz Nominal System Bandwidth: 40 H
20、z to 15 kHz Maximum SPL: 100 dB (A weighted) pink noise signal Output: Bass: 60 Watts Satellites: 18 Watts per channel 5 Part List Notes 1. This part is not normally available from Customer Service. Approval from the Field Service Manager is required before ordering. 2. The individual parts on the P
21、CBs are listed in the Electrical Part list. 3. This part is critical for safety purposes. Failure to use a substitute replacement with the same safety characteristics as the recommended replacement part might create shock, fire and/or other hazards. 4. The part number listed is an assembly part numb
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Bose-Companion3S2-mss-sm 电路图 维修手册 Bose Companion3S2 mss sm 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


