Gemini-CDX802-cd-sm 电路图 维修手册.pdf
《Gemini-CDX802-cd-sm 电路图 维修手册.pdf》由会员分享,可在线阅读,更多相关《Gemini-CDX802-cd-sm 电路图 维修手册.pdf(19页珍藏版)》请在收音机爱好者资料库上搜索。
1、Page 1 SERVICE MANUAL CDX-802 Professional CD Player CONTENTS: Connections track number; pitch value; single-auto cue; continue (continuous play); and three different time displays: track time elapsed, track time remaining and total time remaining on disc. Time is measured in minutes, seconds and fr
2、ames. PLAYBACK DISPLAY: The PLAYBACK DISPLAY (7) displays the play time remaining for each track. The display flashes slowly when the track has 15 seconds remaining and pulses rapidly when play time is down to five seconds. PLAY/PAUSE : Each press of PLAY/PAUSE (8) causes the operation to change fro
3、m PLAY to PAUSE or PAUSE to PLAY. TRACK SKIP : The TRACK SKIP (9) buttons let you select the track to play. SEARCH JOG WHEEL: The SEARCH JOG WHEEL (10) has two functions. Use the SEARCH JOG WHEEL (10) to make fine adjustments in PAUSE mode. Use the SEARCH JOG WHEEL (10) to bend the pitch for precise
4、 synchronization in PLAY mode. SEARCH DIAL: Use the SEARCH DIAL (11) to select the scanning direction and speed of your CD. Turning the dial in a clockwise direction scans forward while a counter-clockwise turn scans the track in reverse. Scan speed increases as the dial is turned. STOP : The STOP (
5、12) button ends CD play. TIME: The TIME (13) button switches the time display between the three available choices listed under DISPLAY (6). FLY CUE: The FLY CUE (14) function lets you set cues “on the fly” with the press of a button. Press FLY CUE (14) when the disc reaches the musical location you
6、wish to make your cue or start point. The cue point is now programmed. Press CUE (15) to return to the cue point. Press PLAY/PAUSE (16) and the unit starts from the pre-programmed spot. CUE: With the unit in the PLAY mode (PLAY/PAUSE LED is green) and after the cue point has been programmed, pressin
7、g CUE (15) will cause the CD player to enter the PAUSE mode (green PLAY/PAUSE LED blinks) at the programmed cue point (the CUE LED glows yellow). Holding down the CUE (15) button changes the function to PREVIEW and starts the CD from the programmed cue point. Releasing the CUE button (15) will retur
8、n the CD laser to the preset cue point. LOOP: After a cue point is memorized, pressing the B/EXIT (16) button in PLAY mode, (the CUE LED blinks yellow), repeats the section between the cue point and the point where the B/EXIT (16) button was pressed. Press the B/EXIT (16) button again or pause play
9、to exit the repeating play. BOP/RELOOP: The BOP/RELOOP (17) button has two functions. To return to a previously saved loop from normal play, press the BOP/ RELOOP (17) button after saving the loop. To return to and instantly play from a previously saved cue point, press the BOP/RELOOP (17) button af
10、ter setting the cue point (if you do not have a loop saved). SINGLE-AUTO CUE/CONTINUOUS: Pressing SINGLE-AUTO CUE/ CONTINUOUS (18) activates the AUTO CUE FUNCTION. The AUTO CUE causes the CD to pause at the recorded beginning of the next track and allows you to start play into the next song with no
11、space in between songs. Pressing SINGLE-AUTO CUE/CONTINUOUS (18) a second time will activate the CONTINUOUS function. This causes the CD to repeat play continuously until SINGLE-AUTO CUE/CONTINUOUS (18) is pressed a third time to deactivate the CONTINUOUS function. PITCH: Pushing the PITCH button (1
12、9) activates the PITCH section of the unit (PITCH LED glows red). The pitch of the CD will change according to the position of the PITCH SLIDE (20). PITCH BEND : Pushing the PITCH BEND (21) buttons will automatically raise the pitch up to +4% or lower the pitch down to -4% from the existing setting.
13、 Releasing the buttons returns pitch to the original setting. Use this function to match the pitch bend when mixing from one song to another. RadioFans.CN 收音机爱 好者资料库 (4) 4%, 8% and 16%: Use the 4%, 8% and 16% (22) buttons to assign the percent the pitch control slide will have. The 4% button will as
14、sign +/- 4% to the PITCH CONTROL SLIDE (20). The 8% button will assign +/- 8% to the PITCH CONTROL SLIDE (20). The 16% button will assign +/- 16% to the PITCH CONTROL SLIDE (20). The PITCH (19) must be ON for the 4%, 8% and 16% (22) buttons to work. INSERT: Set a cue point (using the CUE (15), FLY C
15、UE (14) or SEARCH JOG WHEEL (10). From this cue point you will be able to sample up to 10 seconds of a musical phrase or sound. When you push and hold the INSERT (23) button you will be able to insert that phrase or sound at any spot in the music that is currently playing, replacing what is playing
16、in that spot with up to 10 seconds of the piece you have sampled. When you release the INSERT (23) button the music will continue uninterrupted. NOTE: YOU CAN ONLY USE YOUR “SAMPLE” WITH YOUR CURRENT CD. ONCE YOU OPEN THE DISC TRAY TO CHANGE CDS, YOUR “SAMPLE” WILL BE AUTOMATICALLY DELETED. DIGITAL
17、OUTPUT JACK: Connecting any type of DAT, MD, HARD DRIVE, or other such items which accept digital signals to the BNC (24) output connector on the rear panel of your CDX-802 allows you to record a digital signal from CD. OPERATING INSTRUCTIONS: 1. Make sure that the VOLTAGE SELECTOR SWITCH (1), found
18、 on the rear panel, is set for the proper voltage. Plug the unit in and press the POWER SWITCH (2). The unit is ON. Pushing POWER (1) a second time turns the unit OFF. 2. Press OPEN/CLOSE (4) and place a CD in the DISC TRAY (5). Press OPEN/CLOSE (4) again. The tray will close. 3. Push TRACK SKIP (9)
19、 to select the track you wish to play. 4. Press PLAY/PAUSE (8) and the unit will instantly play. FLY CUE L2;L3 - DSPLAY LAMP 7V/42mA D1 1N4002 CDX802-8-Schematic Vin 1 GND 2 Vout 3 IC4 7805 C7 100/16 C8 100/16 C9 104 +5V 8 7 6 5 4 3 2 1 X3 PITCH A PITCH B GND DO OUT CE CHIP ENABLE CL CLOK DA TRANS.
20、DATA SRV + SHASSIS 8 9 7 6 5 4 3 2 1 X4 MINI DIN A B GND D E F G H E GND G D H F B A 1 2 X6 C01DDIN0. PCB CDX802-7-Schematic S1/P1 1 S2/P2 2 S3/P3 3 S4/P4 4 S5 5 S6 6 S7 7 S8 8 S9 9 S10 10 S11 11 S12 12 S13 13 S14 14 S15 15 S16 16 S17 17 S18 18 S19 19 S20 20 S21 21 S22 22 S23 23 S24 24 S25 25 S26 26
21、 S27 27 S28 28 S29 29 S30 30 S31 31 S32 32 S33 33 S34 34 S35 35 S36 36 S37 37 S38 38 S39 39 COM1 40 COM2 41 COM3 42 COM4 43 KS1/S40 44 KS2/S41 45 KS3 46 KS4 47 KS5 48 KS6 49 KI1 50 KI2 51 KI3 52 KI4 53 KI5 54 TEST 55 VDD 56 VDD1 57 VDD2 58 VSS 59 OSC 60 DO 61 CE 62 CL 63 DI 64 IC2 LC75854E COM1 1 CO
22、M2 2 COM3 3 COM4 4 S0 5 S1 6 S2 7 S3 8 S4 9 S5 10 S6 11 S7 12 S8 13 S9 14 S10 15 S11 16 S12 17 S13 18 S14 19 S15 20 S16 21 S17 22 S18 23 S19 24 S20 25 S21 26 S22 27 S23 28 S24 29 S25 30 S26 31 S27 32 S28 33 S29 34 S30 35 IC3 LCD40 4 13 2 VR1 10KB D4 1N4148 D3 1N4148 D2 1N4148 SW15 PITCH SW14 PITCH-
23、SW10 BOP/RELOOP SW11 PLAY/PAUSE SW7 STOP SW17 PITCH+ SW9 B/EXIT SW5 SGL ACUE SW8 CUE SW12 SKIPREV SW4 TIME SW13 SKIPFWD C3 33/10 C4 681 R15 1K R13 62K R17 10 R16 1K R14 1K +5V +5V 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 6 7 8 9 10 11 12 13 14 15 16 1
24、7 18 19 20 21 22 23 24 25 26 27 28 293031 COM1 COM2 COM3 COM4 COM1 COM2 COM3 COM4 5 5 R8 220 R12 4K7 +5V Vss 14 VDD 1 RB5 2 RB4 3 RB3 4 RC5 5 RC4 6 RC3 7 RC2 8 RC1 9 RC0 10 RB2 11 RB1 12 RBO 13 PIC16C505 IC1 R7 10K R6 10K R2 10K R3 10K +5V C1 104 C2 104 R4 10K R5 10K +5V SHUT A 1 SHUT B 2 SHUT C 3 G
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- Gemini-CDX802-cd-sm 电路图 维修手册 Gemini CDX802 cd sm 维修 手册
收音机爱好者资料库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。



Marshall-9100-62-02-Schematic电路原理图.pdf


