IC-E80D_user.pdf

《IC-E80D_user.pdf》由会员分享，可在线阅读，更多相关《IC-E80D_user.pdf（188页珍藏版）》请在收音机爱好者资料库上搜索。

1、This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: MODIFICATION OF

2、 THIS DEVICE TO RECEIVE CEL- LULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. INSTRUCTION MANUAL iE80D VHF/UHF DIGITAL TRANSCEIVER i FOREWORD Thank you for purchasing this fi ne Icom product. We under- stand you have a choice of many different radios in the mar- ke

3、t place. Many hours of research and development went into the design of your IC-E80D, following Icoms philosophy of “technology fi rst.” The IC-E80D VHF/UHF DIGITAL TRANSCEIVER is designed with Icoms superior technology and craftsmanship combining tra- ditional analog technologies with the new digit

4、al technology, Digital Smart Technologies for Amateur Radio (D-STAR), for a balanced package. With proper care, this product should provide you with years of trouble-free operation. We want to take a couple of mo- ments of your time to thank you for making your IC-E80D your radio of choice, and hope

5、 you agree with Icoms philoso- phy of “technology fi rst.” EXPLICIT DEFINITIONS WORDDEFINITION R DANGER! Personal death, serious injury or an ex- plosion may occur. R WARNING! Personal injury, fire hazard or electric shock may occur. CAUTIONEquipment damage may occur. NOTE Recommended for optimum us

6、e. No risk of personal injury, fi re or electric shock. FEATURES ? DV mode (Digital voice + Low-speed data communication) operation-ready Text message and call sign exchange Transmitting position data with a GPS re- ceiver ? GPS receiver connectable Optional HM-189GPS is required ? DR (D-STAR Repeat

7、er) mode and repeater list allow you to operate a D-STAR repeater simply ? Splash-resistant construction (IPX4*) ? ?* Only when the supplied battery pack (or optional battery case), antenna and jack cover are at- tached. IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the trans

8、ceiver. SAVE THIS INSTRUCTION MANUAL This instruction manual contains important operating instructions for the IC-E80D. ii RWARNING RF EXPOSURE! This device emits Radio Frequency (RF) energy. Caution should be observed when operating this device. If you have any questions regard- ing RF exposure and

9、 safety standards please refer to the Federal Communications Commission Offi ce of Engineering and Technologys report on Evaluating Compliance with FCC Guidelines for Human Radio Frequency Electromagnetic Fields (OET Bulletin 65) RWARNING! NEVER hold the transceiver so that the antenna is very close

10、 to, or touching exposed parts of the body, especially the face or eyes, while transmitting. The transceiver will perform best if the microphone is 5 to 10 cm away from the lips and the transceiver is vertical. RWARNING! NEVER operate the transceiver with an earphone, headphones or other audio acces

11、sories at high volume levels. Hearing experts advise against continuous high volume operation. If you experience a ringing in your ears, reduce the volume level or discontinue use. RWARNING! NEVER operate the transceiver while driving a vehicle. Safe driving requires your full attention anything les

12、s may result in an accident. NEVER connect the transceiver to a power source of more than 16 V DC. This will ruin the transceiver. NEVER connect the transceiver to a power source using reverse polarity. This will ruin the transceiver. DO NOT operate the transceiver near unshielded electri- cal blast

13、ing caps or in an explosive atmosphere. DO NOT push the PTT unless you actually intend to trans- mit. BE CAREFUL! The transceiver will become hot when op- erating it continuously for long periods. DO NOT use or place the transceiver in direct sun- light or in areas with temperatures below 20C or abo

14、ve +60C. Place the unit in a secure place to avoid inadvertent use by children. DO NOT use harsh solvents such as benzene or alcohol to clean the transceiver, because they can damage the trans- ceivers surfaces. PRECAUTIONS iii Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Inco

15、rporated (Japan) in the United States, the United Kingdom, Ger- many, France, Spain, Russia and/or other countries. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries. PRECAUTIONS KEEP away from heavy rain, and never im

16、merse the IC-E80D in the water. The transceiver meets IPX4* require- ments for splash resistance. However, once the transceiver has been dropped, splash resistance cannot be guaranteed because of possible damage to the transceivers case or wa- terproof seal. * Only when the supplied battery pack (or

17、 optional battery case), antenna and jack cover are attached. NEVER operate or touch the transceiver with wet hands. This may result in an electric shock or may damage the trans- ceiver. Even when the transceiver power is OFF, a slight current still fl ows in the circuits. Remove the battery pack or

18、 batteries from the transceiver when not using it for a long time. Other- wise, the installed battery pack or batteries will become ex- hausted, and will need to be recharged or replaced. Important notes when using GPS receiver Please do not use the HM-189GPS close to the transceivers antenna. The t

19、ransmit signal may cause GPS receiver mal- function. iv 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 SUPPLIED ACCESSORIES The following accessories are supplied with the transceiver. q Hand strap 1 w Antenna 1 e Battery pack (BP-217) 1 r Belt clip 1 t Battery charger (BC-167ND)* 1 * Not supplied

20、with some versions. t eq r w v FOREWORD i EXPLICIT DEFINITIONS i FEATURES i IMPORTANT i PRECAUTIONS ii, iii SUPPLIED ACCESSORIES iv TABLE OF CONTENTS vvii 1 ACCESSORY ATTACHMENT 12 ? Antenna 1 ? Belt clip 1 ? Hand strap 2 ? Battery pack 2 2 PANEL DESCRIPTION 39 ? Front, top and side panels 3 ? Funct

21、ion display 8 3 BATTERY CHARGING 1015 ? Caution 10 ? Regular charging 12 ? Rapid charging13 ? Optional battery case 14 ? Battery information 14 ? External DC power operation 15 4 BASIC OPERATION 1628 ? Power ON 16 ? Setting audio volume 16 ? Setting squelch level 17 ? Monitor function 17 ? Mode sele

22、ction18 ? DIAL function assignment 20 ? Operating band selection 20 ? Setting a tuning step 22 ? Setting a frequency 22 ? Lock function 24 ? Receiving 24 ? Operating mode selection 25 ? Attenuator function 25 ? Transmitting 26 ? Transmit power selection 27 ? TV channel operation 27 5 REPEATER AND DU

23、PLEX OPERATIONS 2933 ? Repeater operation 29 ? Accessing a repeater 30 ? Duplex operation 32 ? 1750 Hz tone 33 6 DV MODE PROGRAMMING 3446 ? About the D-STAR system 34 ? Call sign programming 36 ? Repeater list 39 ? Repeater list programming 40 ? Changing a repeater list45 ? Clearing a repeater list

24、46 TABLE OF CONTENTS vi 7 DV MODE OPERATION 4776 ? Digital mode operation 47 ? Current call sign setting 47 ? Receiving a D-STAR repeater 48 ? Received call sign 49 ? Copying the call sign 51 ? DR (D-STAR Repeater) mode operation 53 ? Calling CQ 54 ? Calling a specifi c station 56 ? Simplex operatio

25、n in the VFO 60 ? Repeater operation in the VFO 62 ? Message operation 68 ? Automatic reply function 70 ? EMR communication 71 ? Break-in communication 72 ? Low-speed data communication 74 ? Other function in the DV mode 76 8 GPS/GPS-A OPERATION 7790 ? GPS operation 77 ? GPS-A operation 90 9 MEMORY/

26、CALL CHANNELS 91101 ? General description91 ? Selecting a memory channel 92 ? Selecting a call channel 93 ? Memory channel programming 94 ? Memory bank setting 95 ? Memory bank selection 96 ? Programming memory/bank/scan name 97 ? Selecting memory/bank name indication 98 ? Copying memory/call conten

27、ts99 ? Memory clearing 100 ? Erasing/transferring bank contents 101 10 SCAN OPERATION 102110 ? Scan types 102 ? Full/band/programmed scan 104 ? Scan edges programming 105 ? Memory scan 106 ? Memory bank scan 107 ? Skip channel/frequency setting 108 ? Scan resume condition 110 11 PRIORITY WATCH 11111

28、4 ? Priority watch types 111 ? Priority watch operation 112 12 MENU SCREEN OPERATION 115142 ? General 115 ? MENU screen indication and arrangement 116 ? Items list 117 ? DUP/TONE items (DUP.T) 119 ? Scan items (SCAN) 121 ? Set mode items (SET) 124 ? Function set mode items (FUNC) 124 ? Display set m

29、ode items (DISP) 128 ? Sounds set mode items (SOUNDS) 130 ? DV set mode items (DV SET) 132 ? GPS mode items (GPS)136 TABLE OF CONTENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 vii TABLE OF CONTENTS 13 OTHER FUNCTIONS 143159 ? Programming a DTMF code 143 ? Transmitting a DTMF code 144 ? Cleari

30、ng a DTMF memory 145 ? Confi rming a DTMF memory 146 ? Setting DTMF transfer speed 146 ? Tone frequency and DTCS code 147 ? Digital code and digital call sign setting 148 ? Tone/DTCS squelch 150 ? Digital squelch 151 ? Pocket beep function 151 ? DTCS polarity setting 152 ? Tone scan152 ? Beep tones1

31、53 ? Dial speed acceleration 153 ? Key lock effect 154 ? Power save 154 ? Auto power OFF155 ? Auto power ON 155 ? Time-out timer 155 ? PTT lock 155 ? Display backlighting 156 ? LCD contrast 156 ? Cloning function 157 ? Resetting158 14 TROUBLESHOOTING 160 15 SPECIFICATIONS 161162 16 OPTIONS 163166 ?

32、Optional HM-75A REMOTE CONTROL SPEAKER MICROPHONE 164 ? Optional HM-189GPS GPS SPEAKER MICROPHONE 166 17 CE 167168 INDEX 169175 1 1ACCESSORY ATTACHMENT 1 ? Antenna Insert the supplied antenna into the antenna connector and screw down the antenna as shown below. Jack cover NEVER carry the transceiver

33、 by holding the antenna. KEEP the jack cover attached when jack is not in use to pro- tect the connector from dust and moisture. ? For your information Third-party antennas may increase transceiver performance. An optional AD-92SMA ANTENNA CONNECTOR ADAPTER is available to connect an antenna that ha

34、s a BNC connector. ? Belt clip Supplied screws CAUTION: USE the supplied screws only. Using screws longer than specifi ed could damage the transceiver. 2 1ACCESSORY ATTACHMENT ? Hand strap To facilitate carrying the transceiver, slide the hand strap through the loop on the top of the belt clip as il

35、lustrated below. Handstrap ? Battery pack Attach the Li-Ion battery pack (BP-217) or battery case (BP- 216) as illustrated below. Charge the Li-Ion battery pack before use. (pgs. 12, 13) q w Battery pack/Battery case Latch 3 2PANEL DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ? Front,

36、 top and side panels Speaker Keypad Internal microphone Function display q y u t r w e i o !1 !0 q ANTENNA CONNECTOR (p. 1) Connects the supplied antenna. An optional AD-92SMA adapter (p. 163) is available for connecting an antenna with a BNC connector. w PTT SWITCH PTT ? Push and hold to transmit,

37、release to receive. (p. 26) ? Push briefl y, then push and hold to transmit a 1750 Hz tone burst. (p. 33) e TX/RX INDICATOR TX/RX (pgs. 24, 26) Lights green while receiving a signal or when the squelch is open; lights red while transmitting. r SQUELCH KEY SQL (p. 17) ? Push and hold to open the sque

38、lch temporarily and monitor the operating frequency. ? While pushing and holding this key, rotate DIAL to ad- just the squelch level. t MENU LOCK KEY MENU ? Push to enter menu screen indication ON and OFF. (p. 115) Pushing V/MHz also exits from menu screen. ? Push and hold for 1 sec. to toggle the l

39、ock function ON and OFF. (p. 24) y POWER KEY PWR Push and hold for 1 sec. to turn the transceiver power ON and OFF. (p. 16) 4 2PANEL DESCRIPTION Speaker Keypad Internal microphone Function display q y u t r w e i o !1 !0 u VOLUME CONTROL KEY ?/? ? Adjust audio volume level. (p. 16) ? ? enters or sen

40、ds the DTMF code D. (pgs. 143145) The function of tuning control and volume control can be traded. See page 20 for details. i CONTROL DIAL DIAL ? Rotate to tune the operating frequency. (p. 22) ? During memory mode, rotate to select the memory channel. (pgs. 18, 92) ? While scanning, changes the sca

41、nning direction. (pgs. 53, 104, 106, 107) ? While pushing and holding SQL, sets the squelch level. (p. 17) ? After pushing BAND during memory mode operation, selects the programmed bank. (p. 96) ? During menu screen operation, rotate to select the set items or values. (p. 115) The function of tuning

42、 control and volume control can be traded. See page 20 for details. o EXTERNAL SPEAKER/MICROPHONE JACK SP/MIC Connect a cloning cable, optional speaker microphone or headset, if desired. See page 163 for a list of available options. Be sure to turn power OFF before connecting/disconnect- ing optiona

43、l equipment to/from the SP/MIC jack. 5 2PANEL DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 !0 EXTERNAL DC IN JACK DC IN ? Connects the supplied wall charger, BC-167ND, to charge the attached battery pack. (p. 12) ? Connect an external DC power supply through the op- tional CP-12L, CP-

44、19R or OPC-254L for external DC operation. (p. 15) !1 DATA JACK DATA (pgs. 74, 77, 157) Connects a PC through the optional data communication cable, OPC-1529R, for low-speed data communication in the DV mode or cloning operation. The jack and cable are also used to connect a GPS receiver. D KEYPAD ?

45、 Push to input numeral for frequency input, memory chan- nel selection, etc. ? Push to enter or send the DTMF code. (pgs. 143145) 1 VOLUME/DIAL KEY 1 VD(1) ? Numeral input and DTMF code: 1 ? Push and hold for 1 sec. to exchange the assigned functions between DIAL and ?/?. (p. 20) 2 TUNING STEP KEY 2

46、 TS(2) ? Numeral input and DTMF code: 2 ? Push and hold for 1 sec. to enter tuning step set mode. (p. 22) ? During menu screen operation or select memory write mode, push to select the set items or values. (p. 115) 3 OUTPUT POWER KEY 3 LOW(3) ? Numeral input and DTMF code: 3 ? Push and hold for 1 se

47、c. to select the output power. (p. 27) Selects the transmit output power from high, mid, low and S-low. While pushing and holding this key, DIAL rotation se- lects the output power. 4 DUPLEX KEY 4 DUP(4) ? Numeral input and DTMF code: 4 ? Push and hold for 1 sec. to select minus duplex, plus duplex,

48、 and simplex operation. (p. 32) “DUP” (minus duplex), “DUP” (plus duplex) and no indication (simplex) appear in order. While pushing and holding this key, DIAL rotation se- lects the duplex operation. ? During menu screen operation, push to select the upper layer. (p. 115) 6 2PANEL DESCRIPTION 5 SKI

49、P KEY 5 SKIP(5) ? Numeral input and DTMF code: 5 ? Push and hold to turn the frequency skip function ON and OFF in the VFO mode, or set the memory channel as the following skip channel in memory mode in order. (pgs. 102, 108, 109) “SKIP” appears when memory skip, “PSKIP” appears when frequency skip and no indication appears when non skip channel is set. While pushing and holding this key, DIAL rotation se- lects the skip condition. ? During menu screen operation, push to enter or exit to/from the selected set items, e